User manual KRESS 750 WS 115

[. . . ] The dry wall screwdriver is universally usable for screw driving in dry construction (drywall, plasterboard) as well as pressboard or fibreboard on wood or metal with quick dry wall screws or for the setting of sheet metal and wood screws in interior construction. Before the first operation check that the mains voltage corresponds to that given on the machine nameplate. The holding button (7) on the side of the switch can be pressed for continuous operation. [. . . ] To release the continuous operation merely depress the switch, which makes the holding button spring back automatically. The bit rotates only after the screw is in contact and pressure is applied to the machine. Before operating the machine, please read through the operating instructions completely, follow the Safety Instructions in this manual as well as the general Safety Instructions for Power Tools in the accompanying booklet. ­ Outside power sockets must be protected with residual-current-operated circuit-breakers (r. Continuous operation under strong load and low speed can overheat the motor. Our equipment is designed in accordance with European regulations (EN standards) for the utmost safety of the user. Machines with double insulation always carry the international symbol. It is advisable to use socket-head screws since their self-centering action ensures safe work. This will spare you unnecess-ary repair expenses and increase the machine's service life. If you always clean the ventilator of dust after each operation, the motor will enjoy an ever longer service life. Subject to change without notice Avant de mettre la machine en marche, il convient de lire entièrement la notice d'utilisation et d'observer les consignes de sécurité données dans cette notice ainsi que les consignes de sécurité générales relatives aux outils électriques précisées dans la brochure ci-jointe. CE Declaration of conformity We declare under our sole responsibility that this product is in conformity with the following standards or standardization documents: see CE Technical file at: see TF This electro-tool was manufactured with high precision and subjected to rigorous factory quality controls. Therefore, we guarantee the cost-free correction of fabrication or material defects that occur within 24 months of the date of purchase by the end user. We reserve the right to repair defective parts or replace them with new parts. Improper use or handling as well as opening of the machine by unauthorised repair agencies voids the guarantee. The guarantee may only be enforced when defects are reported without undue delay (including shipping damage). [. . . ] Improper use or handling as well as opening of the machine by unauthorised repair agencies voids the guarantee. The guarantee may only be enforced when defects are reported without undue delay (including shipping damage). If the tool is defective, please complete the guarantee card and return the unit, guarantee card and a brief description of the problem to the responsible service location. [. . . ]