User manual KRESS SBLR 2200

[. . . ] The switch can be clamped for continuous operation with maximum speed. Ensure that the drill is not allowed to jam for longer than 2­3 seconds. [. . . ] Also make sure that, using a gearrim chuck, the drill chuck key is never fastened to the drill with chains, strings or by similar means. maintenance The machine's motor has life-time lubrication and requires no special maintenance. However, should you operate the machine on a continuous basis over long periods of time we recommend that you send us the machine for thorough cleaning and an inspection. This will spare you unnecessary repair expenses and increase the machine's service life. If you always clean the ventilator of dust after each operation, the motor will enjoy an ever longer service life. Replacing carbon brushes Our service personnel will do this and all other servicing work fast and professionally. noise/vibration information Measured values correspond with EN 50144. Sound pressure level: 74 +3 dB (A) Sound power level: 87 +3 dB (A) Work place emission value: 77 +3 dB (A) Please fill in immediately and keep in safe place. CE-Declaration of conformity We declare under our sole responsibility that this product is in conformity with the following standards or standardization documents: EN 50144-2-2, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3 according to the provisions of the regulations 73/23/EEC, 89/336/EEC, 98/37/EC. Double insulation Our equipment is designed in accordance with European regulations (EN standards) for the utmost safety of the user. Machines with double insulation always carry the international symbol. Before fitting tools in the chuck disconnect the machine from the power supply! [. . . ] This electro-tool was manufactured with high precision and subjected to rigorous factory quality controls. We guarantee for material and workmanship within 24 months from date of sale. [. . . ]