User manual KURZWEIL ME-1 V1.2 ADDENDUM

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KURZWEIL ME-1 V1.2. We hope that this KURZWEIL ME-1 V1.2 user guide will be useful to you.


KURZWEIL ME-1 V1.2 ADDENDUM: Download the complete user guide (288 Ko)

Manual abstract: user guide KURZWEIL ME-1 V1.2ADDENDUM

Detailed instructions for use are in the User's Guide.

[. . . ] ME-1 VERSION 1. 2 SOFTWARE SUPPLEMENT -July 2003- · What Is It? Software version v1. 2 is the latest set of feature enhancements for the ME-1 module. · What Does It Do? (i. e. what are the new features in v1. 2?) v1. 2 adds the ability to enable/disable individual MIDI channels. See the section below marked "Operation of New Feature" for operational details. · How Do I Know If I Have v1. 2? If you received this document along with the purchase of a ME-1, then the v1. 2 software should already be installed in your unit. [. . . ] The program allocation into banks (groups) is the same as the PC-2 and the table below shows how they are divided. Selecting Programs on the ME-1 There are two methods that can be used to select programs on the ME-1: a) via the front panel, and b) via MIDI using "MIDI Bank" select messages. This is the method employed if you want to send Bank/Program change messages to the ME-1 from either your master keyboard/device or sequencer. 2 Here is how to select an instrument using the front panel buttons following the table on page 9 in the `Reference Guide': 1) press [Mode Select] button until `Channel' Mode light is lit. 2) using the Data knob, select the desired MIDI channel (1-16) 3) press [Mode Select] button until `Program' Mode light is lit 4) press [bank/menu] button . 5) using the Data knob, select the desired Instrument Category Bank (A ­P). 7) using the Data knob, select the desired Program (1-16) within the current Instrument Category Bank. Example #1: If, on MIDI channel 1, you want to select "6=Scatman" in Instrument Category Bank J, then: 1) press [Mode Select] button until `Channel' Mode light is lit. 2) using the Data knob, select MIDI channel `1' 3) press [Mode Select] button until `Program' Mode light is lit 4) press [bank/menu] button . 5) using the Data knob, select Bank "J" 6) press [bank/menu] button again 7) using the Data knob, select Program #6 (Scatman) Example #2: Following, if you want to change the Program on Channel 1 to "8=Pipe Organ" in Instrument Category Bank G: 1) press [Mode Select] button until `Program' Mode light is lit (if necessary) 2) press [bank/menu] button . 3) using the Data knob, select Bank "G" 4) press [bank/menu] button again 5) using the Data knob, select Program #8 (Pipe Organ) Note: there is no need to reselect the MIDI channel here since you were already on Channel 1. If you wish to use a different MIDI channel, repeat all the steps from Example #1 above, selecting the new MIDI channel first. Here is how to select an instrument remotely (via MIDI) using MIDI Bank Select Messages & Program Changes following the table on page 11 in the `Reference Guide': To select any given program within the ME-1 via MIDI requires the use of BOTH a Bank Select message (Controllers 0/32) and a Program Change. The MIDI specification specifies the use of two Controllers, 0 and 32, as the means to convey a Bank change. Controller 0 is the Most Significant Byte (MSB) and Controller 32 is the Least Significant Byte (LSB). The ME-1 is set to respond to both MIDI Controller 0 & 32 for its MIDI bank selection. In use, the MSB (cc#0) is set to 0 (zero) and the LSB (cc#32) is set to the desired MIDI Bank value. The table on page 11 of the Reference Manual shows you the MIDI Bank number (cc#32) and MIDI Program number used to select any given program within the ME-1's 256 choices. [. . . ] Example #2: So, if, on MIDI channel 2, you want to select MIDI Bank 6, "109=Mono Synth Bass", then: 1) from your transmitting device (keyboard, sequencer, whatever) set it to send a MIDI Bank message (Controller 32) with a value of 6 on channel 2 to the ME-1. 2) following, have your transmitting device send a Program Change with a value of 109. The result will be that , on MIDI channel 2 of the ME-1, MIDI Bank 6, Program 109 ("Mono Synth Bass") will be selected. 4 [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KURZWEIL ME-1 V1.2




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KURZWEIL ME-1 V1.2 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.