User manual LEXICON 12T
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LEXICON 12T. We hope that this LEXICON 12T user guide will be useful to you.
Manual abstract: user guide LEXICON 12T
Detailed instructions for use are in the User's Guide.
[. . . ] 12T System User Guide
Unpacking and Inspection
After unpacking the12T system modules, save all packing materials in case you ever need to ship the units. Thoroughly inspect the modules and packing materials for signs of damage. Report any damage to the carrier at once; report equipment malfunction to your dealer.
Notice
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer's instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which are designated to provide reasonable protection against such interference in a residential installation. [. . . ] In Inverse, the maximum delay value is 800 milliseconds.
Reflect Levels
L RefLvl and R RefLvl control the level of the reflections (L Refl and R Refl). The range of each level is from Full (0dB) to -85dB, and to Off.
75
Shape, Spread
Shape and Spread work together to control the overall ambience of the reverberation. With Shape all the way down, reverberation builds explosively, and decays quickly. As Shape is advanced, reverberation builds up more slowly and sustains for the time set by the Spread. With Shape in the middle, the build-up and sustain of the reverberation envelope emulates a large concert hall (assuming that Spread is at least halfway up, and that Size is 30 meters or larger). Low Spread settings result in a rapid onset of reverberation at the beginning of the envelope, with little or no sustain. Higher settings spread out both the buildup and sustain.
Size
Size sets the rate of build-up of diffusion after the initial period (which is controlled by Diffusion). The Size control changes a reverb sound from very large to very small. Generally, you should set this control to approximate the size of the acoustic space you are trying to create, before adjusting anything else. The size in meters is roughly equal to the longest dimension of the space. Audio is temporarily muted when Size is changed.
Slope
In the Inverse algorithm, Slope determines the shape of the reverb envelope. When set to 0, the level of reverb remains unchanged over its duration, then cuts off abruptly (depending upon the amount of Diffusion in use). Setting Slope above 0 causes the level of reverb to rise smoothly from soft to loud until the sound is cut off. The greater the slope, the softer the initial reverberation and the more pronounced its rise. With negative values, the reverb drops from its initial level to a quieter one before cutoff. The lower the slope, the more pronounced the drop-off.
76
Spin
Spin affects the movement of the reverberation tail. The object of Spin is to continuously alter the timbre of the reverberant sound. This makes the result more natural, without making the position of the instruments unstable. Higher values may make the timbre of piano, guitar and other precisely pitched instruments unstable.
Treble Dcy
Treble Dcy sets the frequency above which a 6dB/octave low-pass filter attenuates the reverberated signal. High frequencies are often rolled off with this parameter, resulting in more natural-sounding reverberation. Setting a low frequency for this parameter can actually shorten the reverb time, as it damps the audio as it recirculates.
77
Preset Design
Notes on Preset Design
PC-90 incorporates the results of a great deal of research into acoustics and reverberation. Reverberation, or reflected sound energy, gives recorded music a sense of being performed in a real acoustic location. [. . . ] This is more likley to happen on non-Intel based computers and slower Intel based computers. Play back the demo song/audio files that came with your audio application. Do these previously recorded 44. 1 or 48k . wav files play back normally through Lexicon Studio?Is the audio quality good when monitoring with Lexicon Studio Punch enable and Global disable? [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LEXICON 12T
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LEXICON 12T will begin.