User manual LEXICON 960L
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LEXICON 960L. We hope that this LEXICON 960L user guide will be useful to you.
You may also download the following manuals related to this product:
LEXICON 960L REV 0 (1114 ko)
LEXICON 960L REV 1 (1207 ko)
LEXICON 960L ADDENDUM (235 ko)
LEXICON 960L BROCHURE (193 ko)
LEXICON 960L ADDENDUM LOGIC7 UPMIX ALGORITHM PACKAGE (2742 ko)
LEXICON 960L INSTALLATION AND RELEASE NOTES SOFTWARE V4.0 (3516 ko)
Manual abstract: user guide LEXICON 960L
Detailed instructions for use are in the User's Guide.
[. . . ] 960L Digital Effects System
OWNER'S MANUAL
Home
Next Page >>
Important Safety Instructions
Save these instructions for later use. · Follow all instructions and adhere to warnings marked on the unit and in the operating instructions. Refer to the manufacturer's operating instructions for power requirements. Be advised that different operating voltages may require the use of a different line cord and/or attachment plug. [. . . ] If your edits create feedback, press the MUTE MACHINE key on the LARC2's Numeric Keypad to mute the output of the current DSP while you solve the problem. If you're not sure which machine is causing the problem, press the MUTE ALL key on the Numeric Keypad.
Figure 4-37B -- 4-Channel Panning Rules
The 960L Surround Panning Rules
The 960L does not produce a phantom center in 5Channel surround modes, and no signal will appear in both the left and right output channels, no matter where you set the joystick. In other words, panning across the
Figure 4-38 -- Editing the V-Page
4-19
Home
Next Page >>
<< Go Back
Operations in Detail
Assigning New Parameters to Faders or the Joystick
Except in Edit mode, the parameter assignments of the faders and joystick make up what we call a virtual page, or V-Page. This is simply a convenient grouping of parameters to simplify operation, but you can group them any way you find convenient. There are two ways to assign new parameters to the LARC2 controls: · · · · · Assigning parameters from the V-Page Assigning parameters as an Edit option Press the EDIT key on the LARC2 control surface. 4-38) shows the assignments for each of the eight faders and the joystick's X and Y-axes. Use the Navigation Arrows to highlight the Type or Parameter to change. (You can also select a fader or joystick axis with the Numeric Keypad, but you still have to navigate to the Type or Parameter. ) Make your selection by cycling through the available Types or Parameters with the +/ keys or touch the fader of the desired parameter. The types are: "None", "Algorithm", "Input", and "Output". The fader or joystick axis is now assigned to whatever parameter you've selected.
Lexicon, Inc.
in up to ten "pages" of up to eight parameters apiece. (The highlighted down-arrow to the right of these pages shows that there are more pages below the screen; these pages can be reached by scrolling with the Navigation Arrow keys or, if you know the number of the page you want, entering that number on the Numeric Keypad. ) Pick the parameter you need from this menu by navigating to it , which will highlight it. This changes the soft buttons to Select (used for selecting algorithms), V-Page (for assigning parameters to faders), and J-Stick (for assigning parameters to the joystick), and the soft-button background will change to yellow. Note: In Edit mode, the parameters and settings on the Scribble Strip are not a V-Page. They are the selected algorithm edit page -- the row whose number is highlighted in larger characters for easier reading.
· ·
The V-Page and Parameter Reassignment
·
On the Main Operating Display, parameters assigned to the V-Page appear in blue; all others are in black.
·
·
FROM THE EDIT (ALGORITHM, INPUTS, OUTPUTS) OPTIONS SCREEN:
Using the Edit Algorithm Screen
This alternate method is a useful shortcut: If you're in the midst of editing algorithms, inputs or outputs, it enables you to quickly pick a parameter and assign it to a fader or the joystick. · Push the EDIT key, then the Algorithm soft button, which brings up the Algorithm Edit screen. This holds all the parameters for the current algorithm,
Press the V-Page soft button to view a numbered list of the eight faders and their assigned parameters (Fig. To assign your newly selected parameter to a fader, type the fader's number on the Numeric Keypad, or touch the desired fader.
Note: You must already have selected a parameter before you get to this screen.
Figure 4-39 -- Edit V-Page screen; programming faders
4-20
Home
Next Page >>
<< Go Back
960L
Operations in Detail
·
Press the J-Stick soft button to view a numbered list of the two joystick axes and their assigned parameters (Fig. To assign your selected parameter to a joystick axis, type the axis number on the Numeric Keypad.
Note: You must already have selected a parameter before you get to this screen.
Figure 4-40 -- Edit V-Page screen; programming the joystick
·
Press the Select soft button to view up a numbered list of the algorithms applicable to your current configuration (Fig. If you select an algorithm here (by typing its number on the Numeric Keypad), a default Program will be loaded that is "typical" for that algorithm.
Note: This is a regular Program load and will destroy any parameter edits or V-Page creation you have done, if you have not previously saved your work.
Figure 4-41 -- Select Algorithm screen
4-21
Home
Next Page >>
<< Go Back
Operations in Detail STORING AND LABELING YOUR EDITS
· · ·
Lexicon, Inc.
Press REGISTER to bring up the Register load screen (see Fig. 4-42), which shows the information for the currently selected Bank or Register. (Pressing NAME brings up a similar screen. ) The currently selected character will be outlined in red on the name line and in the character matrix below. Characters on the name line are selected with the increment and decrement keys (hence the "-" and "+" flanking the name line). [. . . ] After a brief period of time the 960L boot menu will appear on the LARC2 display. Select option 7 "Erase User Registers & Restore Factory Default Settings" by pressing the number 7 button on the LARC2. Note: Do not select any other menu options unless explicitly told to do so by Lexicon. The user registers will be erased and the 960L will be restored to the factory default settings. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LEXICON 960L
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LEXICON 960L will begin.