User manual LOGICOM-SANYO XACTI VPC-WH1EX
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LOGICOM-SANYO XACTI VPC-WH1EX. We hope that this LOGICOM-SANYO XACTI VPC-WH1EX user guide will be useful to you.
Manual abstract: user guide LOGICOM-SANYO XACTI VPC-WH1EX
Detailed instructions for use are in the User's Guide.
[. . . ] À安全へのこころがけ』および『ご使用にあたって』を必ずお読みください。 Make sure to read the “PRECAUTIONS” on page 3 and the “Before you use” on page 5. Indd 4
13/04/22 19:24
組立方法 /ASSEMBLY PROCEDURE
組み立ておよび分解作業は、必ず二人以上で行なってください。
Make sure the chimes are assembled or disassembled by at least two persons. [. . . ] Indd 4
13/04/22 19:24
組立方法 /ASSEMBLY PROCEDURE
組み立ておよび分解作業は、必ず二人以上で行なってください。
Make sure the chimes are assembled or disassembled by at least two persons. ・ 右 ) と ペ ダ ル Ass'y を用意します。
* 以下組立は、手前が奏者側になる向きで行ないます。
1
Connect the pedal assembly to the left and right base sections. Position the pedal assembly and left/right base sections as shown in the illustration right. * The following procedure is carried out to ensure that the performer faces forward when playing the instrument. 右共) 。
Fully loosen screws A, and then slide the pedal assembly pipe all the way into the hole on the base section. After connecting the assembly pipe to the base sections, lock the casters (left and right). Indd 7
13/04/22 19:24
組立方法 /ASSEMBLY PROCEDURE
7 サウンドコラムをハンガーにセットします。 ダンパーが解除されている(ダンパーストッパーがか
かっている) ことを確認します。
* ダンパーがかかっている場合は、ペダルを踏み込んだ 状態でダンパーストッパーを押し下げ、そのままペダ ルを離してダンパーストッパーをかけます。
7
Hanging the sound columns from the hanger. * If the damper is engaged, press down on the damper pedal, then push down on the damper stopper and release the damper pedal to engage the damper stopper. ĸ図のように派生音側〜幹音側の順に取り付けま す。音名の刻印を前面にして、片方のハンガーピ ンの溝に吊りひもを掛け、次にハンガー上部の丸 リベットに掛けてから、もう一方のハンガーピン の溝に吊りひもを通します。このとき、吊りひも の結び目が丸リベットにかからないようにしてく ださい。
Hang the sound columns starting with the accidental tones before hanging the natural tones. Make sure that the pitch name is facing forward then place the string into the guides on the hanger pins and hook the string on the round head rivet. Make sure that the knot in the string is not in contact with the round head rivet. Loosen screw D to adjust the angle of the damper pedal, and then tighten screw D to secure. [. . . ] Make sure that the knot in the string is not in contact with the round head rivet. Loosen screw D to adjust the angle of the damper pedal, and then tighten screw D to secure. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LOGICOM-SANYO XACTI VPC-WH1EX
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LOGICOM-SANYO XACTI VPC-WH1EX will begin.