User manual MARANTZ AV8801

[. . . ] Basic version Advanced version Informations AV Pre Tuner AV8801 Owner?s Manual DVD n SAFETY PRECAUTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ?dangerous voltage?within the product?s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 1. 2. 3. 4. 5. 6. 7. 8. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Read these instructions. [. . . ] (vpage130) in the menu is set to ?ZONE3?, you can use the COMPONENT VIDEO OUT and the VIDEO MONITOR OUT connectors in MAIN ZONE for ZONE3. ? To enable the HDMI control for the ZONE4 HDMI monitor, set ?Control Monitor?(vpage 129) to ?ZONE4?. DVD 112 SELECT 1 Press ZONE?ZONE3?toorswitch ?ZONE2?, ?ZONE4?. Playback Sleep timer function Adjusting the volume Use VOLUME df to adjust the volume. ? This is convenient for viewing and listening while going to sleep in ZONE2, ZONE3 or ZONE4. ? The sleep timer function can be set by zone. Basic version 2 Press ON/STANDBY X to turn on the ZONE2, ZONE3 or ZONE4 power. GAdjustable rangeH 0 ?(vpage 146) is set to ?70 (?10dB)?. SELECT 1 Press ZONE?ZONE3?toorswitch ?ZONE2?, ?ZONE4?. ? Also press input source select button when in standby mode, the power turns on. ? Power in ZONE2, ZONE3 or ZONE4 can be turned on or off by pressing ZONE2 ON/ OFF, ZONE3 ON/OFF or ZONE4 ON/OFF on the main unit. SLEEP and 2 Presswant to set. display the time you Advanced version Input source select buttons Turn VOLUME after pressing ZONE SELECT on the main unit to adjust the sound volume. ? The time switches as shown below each time SLEEP is pressed. Off 120 110 10 min 100 20 90 30 80 40 70 50 60 3 Press the input source select button to select the input source to be played. NOTE For ZONE4, you cannot use VOLUME df to adjust the volume level. The audio and video signal of the selected source is output to ZONE2, ZONE3 or ZONE4. Turning off the sound temporarily Press MUTE :. ? The setting can also be cancelled by adjusting the volume or turning off the ZONE2 or ZONE3 power. ? If SLLEP on the main unit is pressed, the same function as with the remote control unit can be obtained. Informations ? Turn INPUT SELECTOR after pressing ZONE SELECT on the main unit to select an input source. To confirm the countdown time before putting the unit to sleep Press SLEEP. zz Countdown time When power for both MAIN ZONE and ZONE2 (ZONE3 or ZONE4) is set to ON, power of the MAIN ZONE only can be turned off. Select MAIN ZONE in step 1 then press ON/STANDBY X. ? You can adjust the tone and volume for ZONE2 or ZONE3 in ?ZONE2 Setup?? The All Zone Stereo function allows you to simultaneously enjoy in multi-zones (ZONE2/ZONE3) the music that is played back in MAIN ZONE during home party, etc. (vpage 82 ?All Zone Stereo function?). To cancel the sleep timer Press SLEEP to set ?Off?. The sleep timer is also cancelled when this unit is set to the standby mode or the ZONE2, ZONE3 or ZONE4 power is turned off. NOTE The sleep timer function cannot turn off the power of devices connected to this unit. To turn off the power of those connected devices, set up sleep timers on the connected devices themselves. DVD 113 How to make detailed settings Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. You can customize this unit based on your existing system and your preferences. Setting items Detailed items Dialog Enhancer Description Adjusts and enhances the frequency band corresponding to the human voice at the center channel to make the voice clearer. Expands the low and high frequency components of compressed audio to enable richer audio playback. Makes Audyssey MultEQ XT 32, Audyssey Dynamic EQ, Audyssey Dynamic Volume, Audyssey LFC?Assigns the zone that uses the COMPONENT VIDEO MONITOR OUT and VIDEO MONITOR OUT connectors. Page 120 Setting items Detailed items Input Assign Source Rename Hide Sources Inputs Source Level Input Select Video Source Audyssey Setup 122 123 123 Speakers Manual Setup Description Changes input connector assignment. Video of another input source is played back combined with the playing audio. [. . . ] IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Informations nn libvorbis nn Mersenne Twister http://www. math. sci. hiroshima-u. ac. jp/~m-mat/MT/ MT2002/CODES/mt19937ar. c Copyright (C) 1997 - 2002, Makoto Matsumoto and Takuji Nishimura, All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. edistributions of source code must retain the R above copyright notice, this list of conditions and the following disclaimer. 2.  edistributions in binary form must reproduce R the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. DVD LICENSE 3.  he names of its contributors may not be used T to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ?AS IS?AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. [. . . ]