User manual MARANTZ CDR500
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MARANTZ CDR500. We hope that this MARANTZ CDR500 user guide will be useful to you.
Manual abstract: user guide MARANTZ CDR500
Detailed instructions for use are in the User's Guide.
[. . . ] Model CDR500 User Guide
CD Recorder/CD Player
R
CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT
Recordable
ReWritable
CDR500N cover 1, 4 (E)
1
9/7/00, 5:10 PM
CDR500N Rear cover3 (E)
1
9/7/00, 5:15 PM
WARRANTY
Contact your local Marantz distributors for warranty information.
GARANTA
Consulte a su distribuidor local de Marantz si desea ms informacin sobre la garanta.
RETAIN YOUR RECEIPT AS PROOF OF PURCHASE
Your receipt is proof of a valuable purchase. Keep it in a safe place where you can easily find it for filing insurance claims when necessary or when corresponding with Marantz.
CONSERVE EL RECIBO COMO PRUEBA DE COMPRA
Su recibo constituye la prueba de compra. Gurdelo en un lugar seguro donde pueda hallarlo fcilmente en caso de que lo necesite para presentar una reclamacin de garanta o mantener algn tipo de correspondencia con Marantz.
IMPORTANT
It is the responsibility of the consumer to establish proof of purchase when seeking servicing covered by the warranty. Your receipt or invoice is valid as such proof.
IMPORTANTE
Es responsabilidad del consumidor presentar la prueba de compra siempre que solicite alguna reparacin cubierta por la garanta. [. . . ] The default setting of recvolume for digital is 0dB and analog is -12dB when this CD-Recorder is shipped. Finalized CD-RW discs play only on CD-RW compatible CD players.
Press PROG (18, 91) on the remote control to select one or more tracks for recording (see PROGRAMMING page 19): - rotate the REC LEVEL/SELECT (13) key to the required track number, then press PUSH ENTER (13). directly select the track number via the 10-keypad (76) on the remote control, then press ENTER (84). lights continuously and the selected track or program is copied at normal speed. The recording time left will appear.
or:
3 To start recording, press 0 (4).
To check the elapsed recording time, press TIME (14) or DISPLAY (77) on the remote control. Recording will stop automatically.
11
CDR500N P01-14 (E)
11
9/7/00, 5:12 PM
ENGLISH
RECORDING (FROM INTERNAL CD-DECK)
RECORDING (FROM INTERNAL CD-DECK)
The numbers between parentheses refer to the fold-out.
ENGLISH
CD RECORDER/CD PLAYER CDR500
CDR PLAY MODE CD
IR
Recordable
ReWritable
REC LEVEL/SELECT
STANDBY
POWER
ERASE
REC MODE
MENU STORE
TIME
TEXT
PROG HEADPHONE LEVEL
FINAL
INPUT
CANCL DELETE
PUSH ENTER
0
10
e
w
DAO (Disc At Once) recording
A Disc At Once (DAO) recording is a recording of a complete disc in one run, from the Lead-in to the Lead-out without interruption. This avoids the appearance of the so called Orange Book Linking Points which are created each time a new recording is started in a normal CD Recording process (Track At Once (TAO) recording). A Linking Point on a CDR disc, is a small area where the data is corrupt due to a discontinuity in the data pattern. In the CD Red Book specification (the specification for printed CD's from a Glass Master) Linking Points are not permitted due to the high local Block Error Rate (BLER). CD pressing plants will be able to cut a Glass Master directly from a Disc At Once recorded CDR. In the Orange Book Specification, which is valid for CDR, linking points are permitted, as most CD Players will be able to continue reading, while muting the signal at the linking point. As a Disc At Once Recording starts recording at the Lead-in (TOC) and ends at the Lead-out, the finalisation of the recording is part of the Disc At Once Process. Separate finalising is not applicable to a Disc At Once Recording and therefore not needed. Putting a Track At Once recorded CDR (Finalised) in the CD section of the CDR500, will result in a Disk At Once Disk after the Disc At Once recording has been finished. The CDR500 will restore all the linking points present in the source disc while recording in DAO mode. The source disk must comply to the Orange Book Specification, to create a proper DAO disc.
3 To start recording, press 0 (4).
The total remain time of recording appears on the display. lights continuously.
4 To stop recording, once The DAO recording is started,
you cannot stop recording. Any key operation not accepted during the DAO recording.
Important:
If the source disk is not finalised, DAO recording is not possible During DAO recording the Orange Book PMA area will not be transferred to the DAO disc. After DAO recording on a CDRW disk, the CDRW disk can be unfinalised normally (like it is a TAO recorded CDRW disk), however, due to the absence of the PMA area, the disc will be completely erased and its contents are lost!
Note:
The DAO recording cannot be recorded correctly if the CD disc has scratches or dust particles because this reads and copies the TOC and CD sub-code information from the CD disc directly.
1 Make sure that the recording disc is absolutely free of
scratches and dust particles.
2 For recording, press REC MODE (10) repeatedly until
the DAO appears on the display . After 3 seconds, the the remaining CD-R/RW recording time, total time of CD disc, and will be shown continuously on the display.
12
CDR500N P01-14 (E)
12
9/7/00, 5:12 PM
The numbers between parentheses refer to the fold-out.
TRACK INCR.
SCAN
REPEAT
PROG.
RANDOM
ABC
DEF
GHI
1
JKL
2
MN
3
OPQ
4
RST
5
UVW
6
XYZ
7
DISPLAY
CD RECORDER/CD PLAYER CDR500
CDR PLAY MODE CD
8
SPACE
9
SCROLL
0
FUNCTION
IR
CDR
Recordable
ReWritable
CD
REC LEVEL/SELECT
POWER
STANDBY
ERASE
REC MODE
MENU STORE
TIME
TEXT
PROG HEADPHONE LEVEL
u
10
FINAL
INPUT
CANCL DELETE
PUSH ENTER
0
y
u
er t
MENU/ STORE ENTER
CANCEL/ DELETE
Manual start recording
About AUTO TRACK and AUTO STOP
AUTO TRACK is a function to increment track numbers either manually or automatically. AUTO TRACK ON : track number will be automatically incremented according to the source. (See the table on page 22. ) AUTO TRACK OFF : track number can be manually incremented by pressing TRACK INCR. [. . . ] 100 mm Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 mm Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4. 7 Kg
AUDIO
Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Hz - 20 kHz CDR OUT Playback S/N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 dB Playback Dynamic Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MARANTZ CDR500
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MARANTZ CDR500 will begin.