Detailed instructions for use are in the User's Guide.
[. . . ] DVD VIDEO PLAYER
DN-V210/DN-V310
USER GUIDE MODE D'EMPLOI GUÍA DEL USUARIO
IMPORTANT TO SAFETY WARNING:
To reduce the risk of fire and electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus
LABELS (for U. S. A. model only) CERTIFICATION THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR REFOR-MANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
CAUTION
1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. [. . . ] TV ASPECT TV TYPE BRIGHTNESS SHARPNESS VIDEO OUT VIDEO MODE AUTO 4:3 PS NTSC BASIC BASIC COMPONENT FULL
SELECT: SET TV TYPE
SET: ENTER BUTTON
24
r When "BRIGHTNESS" is selected: Use the 5 and cursor buttons to select the level, press the ENTER button to decide. The brightness settings will differ depending on the model of your TV. t When "SHARPNESS" is selected: Use the 5 and cursor buttons to select the level, press the ENTER button to decide. y When "VIDEO OUT" is selected: (Europe model only) Use the 5 and cursor buttons to select the video out, press the ENTER button several times and select the video out. COMPONENT (Factory default) Video signals are output from the color component output connectors. u When "VIDEO MODE" is selected: Use the 5 and cursor buttons to select the video mode, press the ENTER button to decide. AUTO FIT (Factory default) The video is displayed with the size automatically adjusted so there is no distortion. A black band may appear at the right and left sides or the at top and bottom. NOTE: · If stripes of noise appear on the picture or the picture is unclear when playing a specific DVD video disc, try changing the video mode. To exit the setup mode Press the SETUP button.
VIDEO SETUP HDMI RES. TV ASPECT TV TYPE BRIGHTNESS SHARPNESS VIDEO OUT VIDEO MODE AUTO 4:3 PS NTSC BASIC BASIC COMPONENT FULL
SELECT: SET BRIGHTNESS
SET: ENTER BUTTON
t
VIDEO SETUP HDMI RES. TV ASPECT TV TYPE BRIGHTNESS SHARPNESS VIDEO OUT VIDEO MODE AUTO 4:3 PS NTSC BASIC BASIC COMPONENT FULL
SELECT: SET SHARPNESS
SET: ENTER BUTTON
3
y
VIDEO SETUP HDMI RES. TV ASPECT TV TYPE BRIGHTNESS SHARPNESS VIDEO OUT VIDEO MODE AUTO 4:3 PS NTSC BASIC BASIC COMPONENT FULL
SELECT: SET VIDEO OUT
SET: ENTER BUTTON
u
VIDEO SETUP HDMI RES. TV ASPECT TV TYPE BRIGHTNESS SHARPNESS VIDEO OUT VIDEO MODE AUTO 4:3 PS NTSC BASIC BASIC COMPONENT FULL
SELECT: SET VIDEO MODE
SET: ENTER BUTTON
25
ENGLISH
r
When "AUDIO SETUP" is selected
ENGLISH
TOP MENU /PBC
MENU
2, 3
ENTER
ANGLE RETURN
DISPLAY STOP STILL/PAUSE
PLAY
SLOW/SEARCH
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
1
1
Set the "AUDIO SETUP" in SETUP mode. (See page 20. )
Use the 5 and cursor buttons to select the desired setting. DIGITAL OUTPUT Use this to select the digital output's signal format. 96k LPCM OUT Use this to set the digital audio output when playing DVDs recorded in linear PCM audio.
Remote control unit
2
DYNAMIC RANGE This has the effect of reducing the size difference between audio outputs. Even if the audio output is set to MIN, you can still hear audio or conversations. NOTE: · Dynamic range is displayed when the "SETUP MENU MODE" at "SYSTEM SETUP" is set to "EXPERT".
AUDIO SETUP DIGITAL OUTPUT 96K LPCM OUT DYNAMIC RANGE PCM 96k MAX
SELECT: SET DIGITAL OUT
SET: ENTER BUTTON
3
Press the ENTER button to decide the menu item. q When "DIGITAL OUTPUT" is selected: Use the 5 and cursor buttons to select the output format, press the ENTER button to decide. NORMAL When playing DVDs recorded in Dolby Digital or DTS, bitstream signals are output from the digital audio output terminals. When playing DVDs recorded in linear PCM, linear PCM signals are output. [. . . ] 1 2 3 4 5 6 7 8 9
Signal TXD RXD GND CTS RTS -
Communication conditions Configure the serial port of the PC as shown below.
Bit Rate Data length Parity Stop bit Flow control 9, 600 bps 8 bits none 1 bit None
70
Hand shake flow chart · Control command and Status command
DN-V310 PC Control command OK
· Response command
DN-V310 PC
Asynchronous response
Control Status Answer data
Error Codes
Name ecEXT_ERR_OK ecEXT_ERR_UNKNOWN ecEXT_ERR_INVALID_PARA ecEXT_ERR_INV_CMD ecEXT_ERR_INVALID_NA_DISC_ERROR Code 0 1 2 5 10 Description No error Cause of error not known Invalid parameter Command not valid Command not valid for current disc
Command list · External control commands
Group RC PlayT PlayC Command Remote control command Play title Play Chapter RC code Title/Track Number Title Number /Chapter Number Time Search AudioStreamNumber SubPictureStreamNumber Mode Mode Mode Parameter see RC codes 0~99 title : 1~99 chp : 1~99 h m s 1~8 0~32 ON/OFF ON/OFF ON/OFF : 0~6 : 0~59 : 0~59
Time PC SetAST SetSPST OSD LKC RCC
Time Search Set audio stream Set sub-picture stream ON/OFF control for OSD ON/OFF control for KEY LOCK mode ON/OFF control for IR REMOTE LOCK mode
For TITLE, CHAPTER, TRACK and COUNTER, number data follows the command. Example: · [PC, PlayC, 1, 3] PLAY TITLE 1, CHAPTER 3 · [PC, Time, 0, 3, 15]
PLAY 0h3min15sec
71
ENGLISH
ReturnValue can have one of the following values 0 : No error x : Error code x
External control status
ENGLISH
Group GetStatus GetDiscType GetAST PC GetSPST GetT
Command Player status Disc type Current audio stream Current sub-picture stream Current title ReturnValue, Status
Parameter see Status codes see DiscType codes 1~8 0~32 0~99 title : 1~99 chp : 1~999
ReturnValue, Disc Type ReturnValue, AudioStreamNumber ReturnValue, SubPictureStreamNumber ReturnValue, Title/Track Number ReturnValue, Titlle Number, Chapter Number
GetC
Current chapter
Status codes 0:Error, 1:Opened, 2:No Disc, 3:Stopped, 4:Playing, 5:Paused Disc Type codes 0:No Disc, 1:DVD, 2:VCD, 3:CD-DA, 4:MP3, 5:WMA, 6:DivX, 7:JPEG
Asynchronous responses
Group EOT Command End of title ReturnValue, Title/Track Number ReturnValue, Title Number, Chapter Number ReturnValue, Title Number, Chapter Number Return Value, Return Status Return Value, Error code Return Value, HDMI Resolution Parameter 0~99 title : 1~99 chp : 1~999 title : 1~99 chp : 1~999 see Status codes see Error codes 0~4
SOC
Start of a Chapter
PC
EOC Status Change Error Set REZ
End of a chapter
Execution of a command Error notification Set resolution
Set REZ codes
0:OFF, 1:480 p/576 p, 2:720 p, 3:1080 i, 4:AUTO
72
RC (Remote control) codes
Keys/Functions Digit 0 Digit 1 Digit 2 Digit 3 Digit 4 Digit 5 Digit 6 Digit 7 Digit 8 Digit 9 DVD POWER RANDOM REPEAT SLOW/SEARCH (+) SLOW/SEARCH () PLAY PAUSE STOP A-B REPEAT OPEN/CLOSE SUBTITLE AUDIO TOP MENU/PBC Keys/Functions CURSOR UP CURSOR DOWN CURSOR LEFT CURSOR RIGHT ENTER MENU SETUP RETURN ANGLE +10 CLEAR CALL NTSC/PAL SLIDE SHOW DISPLAY ZOOM
0 1 2 3 4 5 6 7 8 9 12 28 29 40 41 44 48 49 59 66 75 78 84
88 89 90 91 92 113 130 131 133 180 181 182 183 184 200 247
73
ENGLISH
RC codes (decimal)
RC codes (decimal)
¤1 TROUBLESHOOTING
ENGLISH
Check again before assuming the player is malfunctioning.
Are all the connections correct?If the DN-V210/DN-V310 does not seem to be functioning properly, check the table below. If this does not solve the problem, the DN-V210/DN-V310 may be damaged. [. . . ]