User manual MARANTZ DV4001

[. . . ] MARANTZ is on the leading edge of DVD research for consumer products and this unit incorporates the latest technological developments. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. [. . . ] In some cases, a subtitle can not be turned off even if you select "OFF". When playing a DVD-Video disc recorded with dialog in two or more languages, you can switch the audio language at anytime during playback. Depending on the disc, there are cases in which the audio language cannot be switched during play. It may take a few seconds till a selected Audio Language is audible. On Video CDs you can switch between stereo, just the left channel, just the right channel or Mixed Mono. During play or pause mode, press the ZOOM button on the remote control to zoom in x2, x3, x4, x1/2, x1/3, x1/4, Normal in order for DVD-Video or VCD and 100%, 125%, 150%, 200%, Normal in order for JPEG. Use the cursor buttons (5//2/3) to select the part of the screen you want to zoom in on. This DVD system can display the disc playback information (for example, title or chapter number, elapsed playing time, audio/subtitle language) and a number of operations can be done without interrupting disc playback. The current audio or subtitle language will be changed to the selected language. The above information is not displayed with a Video CD playing in PBC mode. TT Elapsed - elapsed playing time of current Title; TT Remain - remaining playing time of current Title; CH Elapsed - elapsed playing time of current Chapter; CH Remain - remaining playing time of current Chapter; Total Elapsed - elapsed playing time of current Disc; Total Remain - remaining playing time of current Disc; Single Elapsed - elapsed playing time of current Track; Single Remain - remaining playing time of current Track; Use the numeric keypad (0-9) to enter a valid time (e. Press 5/ to select the desired repeat mode, then, press ENTER to access. The disc reading time may exceed 30 seconds due to the complexity of the directory file configuration. If the disc main menu contains various folders, use the 5/ keys to select a desired folder and press ENTER to open the folder. Use the 5/ keys to select a track/file and press ENTER to start playback. Playback will start from the selected file and continue through to the end of the folder. During playback, you can; · To select another folder from the current Use the 5/ keys to make your selection and press ENTER to confirm. This DVD system can playback most of the MP3, JPEG and Windows MediaTM Audio files recorded on a CD-R/RW disc or commercial CD. Some discs cannot be played on this player due to the configuration and characteristics of the disc, or due to the condition of recording and authoring software that was used. Use the 2/3/5/ keys to highlight one of the pictures and press ENTER to start playback. During playback, use the 2/3/5/ keys 5: Flip the picture vertically : Flip the picture horizontally 2: Rotate the picture counter-clockwise 3: Rotate the picture clockwise It can only display DCF-standard still pictures or JPEG pictures e. It cannot play back moving pictures, Motion JPEG and other formats, or pictures in formats other than JPEG, or pictures associated with sound. [. . . ] If the disc is multi-session, you will only be able to play tracks recorded onto the first session. The unit is connected to an HDMI/DVI component but the HDMI/DVI indicator on the display does not light. This unit cannot be connected to TVs or HDMI/DVI components that do not support HDCP. Reset this unit and the TV or HDMI/DVI component by turning them off and on. [. . . ]