User manual MARANTZ M-CR502

[. . . ] SVENSKA ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH M-CR502 CD Receiver ENGLISH WARRANTY For warranty information, contact your local Marantz distributor. RETAIN YOUR PURCHASE RECEIPT Your purchase receipt is your permanent record of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when corresponding with Marantz. IMPORTANT When seeking warranty service, it is the responsibility of the consumer to establish proof and date of purchase. [. . . ] Turn the power on by pressing the ON/STANDBY button on the unit. LISTENING TO A CD The unit can also play MP3 and WMA music data files written on a CD-R or CD-RW disc in ISO9660 Mode 1 or Mode 2 CD-ROM format. Be sure to adjust the audio volume level of the unit before listening to a CD. 1. Note: When changing the input source to CD using the INPUTbuttonontheunit, besuretoputtheremote controller into CD/USB mode by pressing its CD button. · Adjust the volume to your taste when playback starts using the volume buttons on the unit or remote controller. Open the disc tray by pressing the 0 button and then place the CD on the disc tray. Make sure that the printed label is facing up when placing the CD on the tray. 2. 1. Turn the power on by pressing the POWER button on the remote controller. PAUSING PLAYBACK 2. · A display like that given below appears on the display panel after disc information has been read. 6. Stop playback by pressing the 7 button on the unit or remote controller. 11 MISCELLANEOUS 5. 6. IF YOU EXPERIENCE PROBLEMS When the power is turned on, the input source last used is displayed on the display panel. If the power is set to standby mode, the display panel displays the time. 6. · Resume playback by again repressing the 6 button on the unit or the 2 button or the 8 button on the remote controller. STOPPING PLAYBACK ADVANCED OPERATIONS PRACTICAL CONNECTIONS 5. Pause playback by pressing the 6 button on the unit or the 8 button on the remote controller during playback. BASIC SETTINGS · Play the CD by pressing the 6 button on the unit; or the 2 button, RANDOM button, or any of the numeric buttons on the remote controller while the disc tray is closed. BASIC OPERATIONS 1. 1. 6. 2. 2. BASIC CONNECTIONS Select CD as the input source by pressing the INPUT button on the unit or the CD button on the remote controller. PLAYING A CD 4. Start playing the CD by pressing the 6 button on the unit or the 2 button on the remote controller. NAMES AND FUNCTIONS ENGLISH NAMES AND FUNCTIONS BASIC CONNECTIONS BASIC OPERATIONS BASIC SETTINGS PRACTICAL CONNECTIONS ADVANCED OPERATIONS IF YOU EXPERIENCE PROBLEMS MISCELLANEOUS BASIC OPERATIONS 1. 2. PLAYING THE NEXT TRACK LISTENING TO A RADIO BROADCAST Before listening to a radio broadcast, be sure to check that the AM and FM antennas are properly connected to the unit. 1. 1. 2. Play the next track by pressing the § button during playback. If you want to play tracks even further ahead of the current track, the track number changes equal to the number of times the § button is pressed. · Selecting a track number using the numeric keys on the remote controller will automatically play that track. · Press the numeric keys on the remote controller in succession to select a track number equal to or greater than 10. For example, press 1 followed by 8 on the remote controller if you want to listen to track 18. Note that playback starts from track 1 if 8 is not entered within 3 seconds after having entered 1. Select FM or AM as the input source using the INPUT button on the unit or the TUNER button on the remote controller. Note: WhenchangingtheinputsourcetoFMorAMusing the INPUT button on the unit, be sure to put the remotecontrollerintoTUNERmodebypressingits TUNERbutton. 2. 2. Holding down either of the 1/2 buttons on the unit or either of the TUNNING 3/4 buttons on the remote controller for more than 1 second automatically selects the frequency of the next receivable station in the direction indicated. "TUNED" lights on the display panel while receiving a broadcast station. · "STEREO" lights on the display panel while receiving a stereo broadcast on an FM channel. 3. FAST FORWARD AND RAPID REWIND · It is possible to quickly find the part of a track you want to listen to. · The audio volume output by the speakers is reduced during fast forward/rapid rewind. 1. PLAYING THE PREVIOUS TRACK 1. 2. Start playback from the beginning of the track currently being played by pressing the button during playback. If you want to play to the track before the current track, move to the previous track by pressing the button two times in succession. RAPID REWIND Hold down the button on the unit or the 5 button on the remote controller during playback until you find the track section you want to listen to. [. . . ] 0. 05% S/N ratio (10W, 8 , IHF-A) AUX input. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86dB 300 302 280 The specifications and external appearance of this unit may be changed without prior notification for the purpose of improvement. 111 CLASS 1 LASER PRODUCT LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT TUNER FM tuner Range of receivable frequencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87. 5 to 108. 0MHz S/N ratio (mono) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65dB Sensitivity (S/N 30dB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]