User manual MARANTZ PD4220V

[. . . ] Model PD4220V User Guide Plasma Monitor Introduction Introduction to the Plasma Monitor Marantz's Plasma Monitor is a seamless blend of cuttingedge visual technology and sophisticated design. At each inch, with a 16:9 aspect ratio, the Plasma Monitor certainly makes a big impression. However, the monitor's sleek techno-art lines blend in well with your environment. Marantz Plasma Monitor's crisp, vivid image quality will transform data from any graphic medium from PCs to DVD players- into art. [. . . ] Restoring the factory default settings Select "ALL RESET" under the OPTION1 menu. Note that this also restores other settings to the factory defaults. 3. Adjust using the and buttons. V-POSITION * If neither the or button is pressed within 5 seconds, the current setting is set and the previous screen reappears. Repeat from step 2. 22 Information When "AUTO PICTURE" is "OFF" IMAGE ADJUST ASPECT MODE : FULL V-POSITION H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE : OFF FINE PICTURE PICTURE ADJ. ADJ. Option1 Settings Menu Setting the on-screen menu This sets the position of the menu, the display format (horizontal or vertical) etc. On the MAIN MENU, select "OPTION1", then press the MENU/ENTER button. Use the v and w buttons to select "OSM", then press the MENU/ENTER button. The mode switches as follows each time the button is pressed: ON OFF OSM DISPLAY OSM OSM ADJ. OSM ANGLE OSM ORBITER : : : : OFF 1 H OFF When Auto Picture is off, the Fine Picture and the Picture ADJ. The Picture ADJ. , Fine Picture and Position adjustments are made automatically. The Picture ADJ. , Fine Picture and Position adjustments are made manually. * If FINE PICTURE won't be adjusted, set Auto Picture to OFF and adjust manually. and Fine Picture features are available only when the "Auto Picture" is off. But, these features are not available for moving pictures on VIDEO, HD/DVD or RGB. Restoring the factory default settings Select "ALL RESET" under the OPTION1 menu. Note that this also restores other settings to the factory defaults except for Auto Picture. or SEL. ADJ. EXIT RETURN Information DISPLAY OSM settings ON . . . . . . . . . . . . If you press the DISPLAY button on the remote control for more than 3 seconds the main menu will appear and can be set (although it is not ON). OSM ADJUST settings Adjusts the position of the menu when it appears on the screen. The position can be set between 1 to 6. OSM ANGLE settings Sets the display format (landscape "H" or portrait "V"). When the unit is installed vertically set the OSM ANGLE at "V". "H" 1/3 OPTION1 OSM : RGB BNC INPUT : RGB D-SUB INPUT : AUTO RGB SELECT : 1080B HD SELECT : OFF INPUT SKIP : OFF ALL RESET NEXT PAGE MENU/ENTER OK EXIT RETURN SEL. 23 "V" OPTION1 OSM BNC INPUT : RGB D-SUB INPUT : RGB RGB SELECT : AUTO HD SELECT : 1080B INPUT SKIP : OFF ALL RESET : OFF 1024 768 SEL. MENU/ENTER OK EXIT RETURN Checking the signal being transmitted to RGB1 terminal Use this to confirm the signal being transmitted to the RGB1 terminal. [. . . ] Monter les tores en ferrite aux deux extrêmités du câble DVI (non fourni) et aux deux extrêmités du câble d'alimentation électrique (fourni). Fermez doucement le couvercle jusqu'à ce que les crans se clipsent. Fixer le tore en ferrite (fourni) au câble DVI à l'aide d'un collier. Câble DVI (non fourni) Collier Collier Connecteur noyau (petit) noyau (petit) Câble d'alimentation électrique (fourni) noyau (large) noyau (large) 4 Specifications Screen Size Aspect Ratio Resolution Pixel Pitch Color Reproduction Signals Synchronization Range 36. 3"(H) 20. 4"(V) inches 921(H) 518(V) mm diagonal 42" 16 : 9 853(H) 480(V) pixels 0. 04"(H) 0. 04"(V) inches 1. 08(H) 1. 08(V) mm 256 levels, 16, 770, 000 colors Horizontal : 15. 5 to 110 kHz (automatic : step scan) Vertical : 50. 0 to 120 Hz (automatic : step scan) RGB, NTSC (3. 58/4. 43), PAL (B, G, M, N), PAL60, SECAM, HD*1 , DVD*1 , DTV*1 40" (1018) 1. 18" (30) 2. 32" (59) 36. 3" (921) 20. 4" (518) 24" (610) 3. 5" (89) Input Signals Input Terminals (VIDEO1 and RGB1 can also be used as OUTPUT terminals) RGB Visual 1 (Analog) mini D-sub 15-pin 1 Visual 2 (Analog) BNC (R, G, B, H/CS, V) 1*2 Visual 3 (Digital) DVI-I 24-pin 1*3 Video Visual 1 BNC 1 Visual 2 RCA-pin 1 Visual 3 S-Video: DIN 4-pin 1 DVD/HD/DTV Visual 1 RCA-pin (Y, PB[CB], PR[CR]) 1*1 Visual 2 BNC (Y, PB[CB], PR[CR]) 1*1, *2 Audio Stereo RCA 3(Selectable) External Control D-sub 9-pin 1(RS-232C) Sound output 8W+8W at 6 ohm Power Supply Current Rating AC120V 50/60Hz 3. 7A (maximum) AC100-240V 50/60Hz 4. 5A (maximum) Power Consumption 270W (typical) Dimensions 40 (W) 24 (H) 3. 5 (D) inches 1018 (W) 610 (H) 89(D) mm Weight 62. 8 lbs / 28. 5 kg (without stand) Environmental Considerations Operating Temperature 0°C to 40°C / 32°F to 104°F Humidity 20 to 80% (no condensation) Altitude 0 to 9180 feet / 0 to 2800 m Storage Temperature -10°C to 50°C / 14°F to 122°F Humidity 10 to 90% (no condensation) Altitude 0 to 9840 feet / 0 to 3000 m Front Panel User Controls Power on/off, Input source select, Volume up/down, OSM control Remote Control Functions Power on/off, Input source select, OSM control, Volume up/down, Cursor (UP, DOWN, LEFT, RIGHT), Pointer, Zoom up/ down, Off timer, Wireless/Wired remote control OSM Functions Picture (Contrast/Brightness/Sharpness/ Color/Tint/ Picture mode/Noise reduction/Color temperature/ White balance/Gamma/Low tone/Color tune), Audio (Bass/Treble/Balance/Audio input), Image Adjust (Aspect mode/V-Position /H-Position/V-Height /HWidth/Auto Picture/Fine picture/Picture adjustment), Option1 (OSM/BNC Input/D-Sub Input/RGB Select/ HD Select/Input Skip/All Reset), Option2 (Power management/Cinema mode/Long life [PLE, Orbiter, Inverse, White, Screen wiper, Soft focus]/Gray level/ S1/S2), Option3 (Timer/Power on mode/Control lock/ IR Remote/Loop out/ID number/Video wall [Divider, Position, Disp. mode, Auto ID, Image adjust, Power on delay, PLE link, Timer]), Advanced OSM, Language*, Color system, Source information *English, German, French, Italian, Spanish, Swedish, Chinese Units are in inch (mm) The features and specifications may be subject to change without notice. *1 HD/DVD/DTV input signals supported on this system 480P (60 Hz) 480I (60 Hz) 525P (60 Hz) 525I (60 Hz) 576P (50 Hz) 576I (50 Hz) 625P (50 Hz) 625I (50 Hz) 720P (60 Hz) 1035I (60 Hz) 1080I (50 Hz) 1080I (60 Hz) 2 * The 5-BNC connectors are used as RGB/PC2 and HD/DVD2 input. [. . . ]