User manual MARANTZ PD5010D

[. . . ] R Model PD5010D User Guide Plasma Monitor Important Information Precautions Please read this manual carefully before using your Marantz plasma monitor and keep the manual handy for future reference. Warnings and Safety Precaution The Marantz plasma monitor is designed and manufactured to provide long, trouble-free service. Never use solvents such as alcohol or thinner to clean the panel surface. Although Marantz produces the plasma display panels with more than 99. 99 percent active cells, there may be some cells that do not produce light or remain lit. For operating safety and to avoid damage to the unit, read carefully and observe the following instructions. [. . . ] Use the v and w buttons to select "PICTURE MODE". PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT PICTURE MODE COLOR TEMP. To delete the main menu, press the EXIT button once more. Information Types of picture modes MEMORY . . . . . . . . This mode provides darker, finer pictures, like the screen in movie theaters. CONTRAST = 80% for RESET mode BRIGHTNESS = 95% for RESET mode NORMAL . . . . . . . . . This mode provides dynamic pictures with distinct differences between light and dark sections. Use this to reset the picture to the factory default settings. R G : MEMORY :2 : OFF EXIT RETURN 3. and The mode switches as follows when the buttons are pressed: MEMORY THEATER NORMAL RESET PICTURE MODE : THEATER * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears. 20 Setting the color temperature Use this procedure to set color tone produced by the plasma display. Example: Setting "1" Press the PROCEED button on the remote control unit to display the MAIN MENU on the screen, then. . . Use the v and w buttons to select "PICTURE", then press the PROCEED button. Use the v and w buttons to select "COLOR TEMP. ". PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT R PICTURE MODE : MEMORY COLOR TEMP. To delete the main menu, press the EXIT button once more. Information Setting the color temperature 1 . . . . . . . . . . . . . . . . . . . . . . Low (redder) Restoring the factory default settings Select "RESET" under the function menu. Note that this also restores other settings to the factory defaults. G EXIT RETURN 3. and The mode switches as follows when the buttons are pressed: 1 2 3 PRO * See page 22 to set "PRO". COLOR TEMP. : 1 * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears. 21 Adjusting the color to the desired quality Use this procedure to adjust the white balance for bright pictures and dark pictures to achieve the desired color quality. Example: Adjusting the "WHITE BALANCE" Press the PROCEED button on the remote control unit to display the MAIN MENU on the screen, then. . . Use the v and w buttons to select "PICTURE", then press the PROCEED button. Use the v and w buttons to select "COLOR TEMP. ". PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT R PICTURE MODE : MEMORY COLOR TEMP. Use the v and w buttons to select "RED-GAIN". WHITE BALANCE GAIN RED GREEN BLUE BIAS RED GREEN BLUE SEL. ADJ. EXIT RETURN 6. Adjust the white balance using the and buttons. G R-GAIN EXIT RETURN * If neither the or button is pressed within 5 seconds, the current setting is set and the previous screen reappears. and The mode switches as follows when the buttons are pressed: 1 2 3 PRO Information Adjusting the white balance RGB-GAIN . . . . . . . White balance adjustment for black level Restoring the factory default settings Select "RESET" under the function menu. Note that this also restores other settings to the factory defaults. COLOR TEMP. : PRO * If neither the or button is pressed within 5 seconds, the current selection is set and the previous screen reappears. 22 Reducing noise in the picture Use these settings if the picture has noise due to poor reception or when playing video tapes on which the picture quality is poor. Example: Setting "NR-3" Press the PROCEED button on the remote control unit to display the MAIN MENU on the screen, then. . . Use the v and w buttons to select "PICTURE", then press the PROCEED button. Use the v and w buttons to select "NR". PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TINT PICTURE MODE COLOR TEMP. [. . . ] ITM Company Marantz Domestic Sales ADDRESS 8, Lotissement Ben Hatadi, Alger, Algerie 47 A/75 St. Waverley, VIC 3149, Australia Taborstraße 95 / Ladestraße 1, Gebäude Hangartner, A-1200 Wien, Austria P. O. Box 237, 141, Government Avenue, Manama, Bahrein 1078, Ramjoy Mohanja Lane Asadgonj, Chittagong 4000, Bangladesh Brusselbaan 278, 9320 Erembodegem, Belgium Makedonia Blvd. 16, 1606 Sofia, Bulgaria 633 Granite Court, Pickering, Ontario No. 38 Yushan Road, ShiQiao, Pan Yu, Guang Dong, China P. O. [. . . ]