User manual MARANTZ RC2001

[. . . ] This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you operate the RC2001. BEFORE USE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 LOADING BATTERIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 USING THE REMOTE CONTROLLER WITH INFRARED RAYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . 4 CHECKING THE ACCESSORIES After opening the cover of the packing box, check that the following accessories are included. [. . . ] • The RC2001 performs regular operation even when the sleep timer is activated. ENGLISH 1. Press the button that will be assigned to the sleep timer. Each time the button is pressed, the sleep setting time changes in the cycle shown below. PROCEED?Perform operation of the device that you want to control in the selected device mode. To control another device, return to Home mode and select another device. 2. 3. The preinstalled default user file is used to control Marantz products. The AV receiver device input switching code is assigned to the button next to the displayed device name of the device mode. Example: After DVD mode is selected in the remote controller, pressing the button next to DVD, shown in the first column in the LCD, transmits the AV receiver DVD input command. When the time that you want to set is displayed, wait at the setting for three seconds. • The sleep setting screen is no longer displayed on the LCD, and the sleep timer is automatically started. • When the remaining time for the sleep timer setting is 10 minutes, the remaining time is displayed in the Sub info. area of the LCD. DVD input command for Marantz AV Receiver. SLEEP TIMER icon 6 RC2001_E_01_ENG. indd 6 07. 10. 11 0:59:12 PM MAIN MENU The various settings for the remote device are made in the main menu. 1. Place the remote controller so that its infrared signal transmitter is facing the infrared signal receiver on the Marantz remote controller at a distance of about 2 inches (0. 05 m). ENTERING THE MAIN MENU 1. Hold down the Home button and Menu button at the same time for three seconds to display MAIN MENU on the LCD. 2. Display the MAIN MENU on the LCD of the RC2001, and then press the button next to the LEARNING indicator. 3. The screen appears as shown below. Pressing the button next to the CHECK indicator on the LCD displays the timer settings. 2. 2. Use the numeric buttons (0 to 9) and cursor buttons (t and u) to set the time for the timer. After making the setting, press the ENTER button. When the LCD appears as shown below, the timer has not been set. • Either press the ENTER button or wait three seconds for the LCD to automatically return to the TIMER menu. • Pressing the Home button from the TIMER MENU screen returns the LCD to the MAIN MENU. 9 RC2001_E_01_ENG. indd 9 07. 10. 11 0:59:13 PM ENGLISH 2. Select the commands and devices for the commands that will be sent by timer programming. • If a command assigned to the HARD button is to be sent by timer programming, press the HARD button when selecting the command to make the setting. • If a command assigned to the SOFT button is to be sent by timer programming, use the < and > buttons when selecting the command to move the page, and select the command assigned to the SOFT button. 4. Press a button next to the EVERYDAY or ONE TIME indicators on the LCD to set timer operation to either everyday or onetime only operation. ENGLISH • The timer settings are displayed. Check that the settings are correct. Setup time Device name HARD or SOFT button Key name EVERYDAY or ONE TIME • Either press the ENTER button or wait three seconds so that COMPLETED is displayed on the LCD and the operation settings are automatically completed. Note: The timer setting for the SOFT button cannot be used in Home mode. • Either press the ENTER button or wait three seconds for the LCD to automatically return to the MAIN menu. 10 RC2001_E_01_ENG. indd 10 07. 10. 11 0:59:13 PM 1. Press the button next to the ON/OFF indicator in the TIMER menu screen on the LCD to display the timer operation ON/OFF setting screen. 2. Press the button next to the TIMER ON (Enable) or TIMER OFF (Disable) indicators on the LCD to either enable or disable timer operation. • Either press the ENTER button or wait three seconds for the LCD to automatically return to the MAIN menu. • When timer operation is set to ON, the timer icon is displayed in the Sub Info area of the LCD. 24 TIMER icon 11 RC2001_E_01_ENG. indd 11 07. 10. 11 0:59:14 PM ENGLISH OPERATION ON/OFF SETTINGS 3. Either press the ENTER button or wait three seconds so that COMPLETED is displayed on the LCD and the operation settings are automatically completed. 3. SYS. SETUP Display the MAIN MENU on the LCD of the RC2001, then press the button next to the SYS. • CLOCK (Clock setting) • BACK LIGHT (Backlight illumination time setting) • LCD (LCD setting) • BEEP (Beep sound setting) • MEM CLEAR (Initialization setting) 2. Use the numeric buttons (0 to 9) and cursor buttons (t and u) to set the current time. After setting the correct time, press the ENTER button. ENGLISH 3. The message COMPLETED is displayed in the LCD to indicate that the clock setting is completed. CLOCK (CLOCK SETTING) This sets the clock for the RC2001. 1. Press the button next to the CLOCK indicator in the SYS. SETUP menu screen in the LCD to display the clock setting screen. • Either press the ENTER button or wait three seconds for the LCD to automatically return to the SYS. SETUP menu. Please check it occasionally and set to the correct time if necessary. [. . . ] 54 x 228 x 25 mm (2-3/16 x 9 x 1ins. ) Unit Weight (With Batteries) . . . . . . . . . . . . . . . . (25mm) 18 RC2001_E_01_ENG. indd 18 07. 10. 11 0:59:16 PM The section describes the care and maintenance tasks that must be performed to optimize the operation of your Marantz component. CLEANING OF EQUIPMENT EXTERNAL SURFACES The exterior finish of your unit will last indefinitely with proper care and cleaning, Never use scouring pads, steel wool, scourging powders or harsh chemical agents (e. g. , lye solution), alcohol, thinner, benzine, insecticide or other volatile substances as these will mar the finish of the equipment. If the equipment get dirty, wipe the external surfaces with a soft, lint-free cloth. If the equipment becomes heavily soiled: • dilute some washing up liquid in water, in a ratio of one part detergent to six parts water. [. . . ]