User manual MARANTZ SR3001

[. . . ] Model SR3001 User Guide AV Surround Receiver CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT 9. This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. [. . . ] Attenuation will not work with the output signal of TAPE-OUT, CD-R/MD-OUT, VCR1-OUT and DSS/ VCR2-OUT. This function is memorized for each individual input source. Notes: · When using headphones, the surround mode will change to STEREO and TruSurround (TS) headphones by SURROUND MODE button. · The surround mode returns to the previous setting as soon as the plug is removed from the jack. VIDEO ON/OFF When no video signal is connected to the SR3001 or a DVD, etc. , is connected directly to your TV, the unnecessary video circuit can be turned off by selecting the "VIDEO OFF" setting. To select video off, press the V-OFF button on the remote. T. TONE PURE DIRECT AUTO MENU OFF DTS You can select the display mode for the front display of the SR3001. To select this mode, press the DISPLAY on the front panel or on the remote. When this button is pressed, the display mode is switched in the following sequence. Surround Mode Auto-display Off Display Off Input Function Surround Mode. . . . But, if you make a change to the unit such as input or surround mode, the display will show that change, then go back to off after about 3 seconds. Note: Only the DISP indicator will be illuminated on the front display, in display off condition T-MODE RDS F. DIRECT If you have already assigned the digital inputs, you can temporarily select the audio input mode for each input source with the A/D button on the remote controller. When this button is pressed, the input mode is switched in the following sequence. In Digital Auto mode, the types of signals being input to the digital and analog input jacks for the selected input source are detected automatically. If no digital signal is being input, the analog input jacks are selected automatically. In Digital mode, input is fixed to an assigned digital input terminal. This selecting is temporary, so the result will not be stored in memory. If you need to change the input mode completely, use INPUT setup in SETUP MENU system. (see page 17) 1 NIGHT CSII 2 EX/ES 3 VIRTUAL 4 DISPLAY MCH-ST 5 STEREO 6 7. 1CH IN 7 CLEAR MEMO 8 A/D 9 P. SCAN/V-OFF 0 CHANNEL/SKIP BASS TREBLE TUNE/SEARCH T-MODE RDS F. DIRECT INPUT/DISC+ AUDIO SUB-T/ATT PTY CH. SEL LIP. SYNC 27 ENGLISH LISTENING THROUGH HEADPHONES DISPLAY MODE SELECTING ANALOG AUDIO INPUT OR DIGITAL AUDIO INPUT RECORDING AN ANALOG SOURCE In normal operation, the audio or video source selected for listening through the SR3001 is sent to the record outputs. This means that any program you are watching or listening to may be recorded simply by placing machines connected to the outputs for TAPE OUT, CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT in the record mode. To record the input source signal you are currently watching or listening to Recording the video from one source and the audio from another You can add the sound from one source to the video of another source to make your own video recordings. Below is an example of recording the sound from a compact disc player connected to CD IN and the video from a video camera connected to VCR1 to video cassette recorder connected to the DSS/VCR2 OUT jack. HT-EQ AV SURROUND RECEIVER SR3001 INPUT SELECTOR 7. 1 CH INPUT The SR3001 is equipped for future expansion through the use of Multi channel SACD multichannel player or DVD-Audio player. When this is selected, the input signals connected to the L(front left), R (front right), CENTER, SL (surround left), SR (surround right) and SBL (surround back left) and SBR (surround back right) channels of the 7. 1 CH. In jacks are output directly to the front (left and right), center, surround (left and right) and surround back speaker systems as well as the pre-out jacks without passing through the surround circuitry. In addition, the signal input to the SW (subwoofer) jack is output to the PRE OUT SW (subwoofer) jack. [. . . ] 0552, 0598 Polaroid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1088 Polk Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0566 Proscan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0549 Qwestar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]