User manual MARANTZ SR4300
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MARANTZ SR4300. We hope that this MARANTZ SR4300 user guide will be useful to you.
You may also download the following manuals related to this product:
MARANTZ SR4300 (35850 ko)
Manual abstract: user guide MARANTZ SR4300
Detailed instructions for use are in the User's Guide.
[. . . ] R
Model SR4300 User Guide AV Surround Receiver
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. NOTE TO CATV SYSTEM INSTALLER:
This reminder is provided to call the CATV (Cable-TV) system installer's attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Or press the or cursor button to select "EXIT" then press the OK button to exit the SETUP MENU. Or press the or cursor button to select "RETURN" then press the OK button to return the previous "SPEAKER DISTANCE" setup. If you select "MANU", adjust the output level of each speaker as follow.
M-CH ST 2CH 6. 1CH -IN
Maximum
+10dB
+9dB 1 dB interval Reference 1 dB interval -9dB Minimum -10dB (SW -15 dB) 0dB button
button
2. 5.
7
BASS
F. DIRECT
8
A/D
9
0
OFF SETUP/T. TONE MENU
3. 5.
OK
S-DIRECT
MUTE
VOLUME
5.
1.
When you select "MANUAL" in T. MODE menu by pressing the or button, this unit will emit a pink noise from the front left speaker. This unit will emit the pink noise from the center speaker.
Press the cursor button again. Repeat steps 2 and 3 above for the front right and other speakers until all speakers are adjusted to the same volume level. When you select "TO MAIN MENU" by pressing the OK button, you can return the SETUP MAIN MENU by pressing the OK button . Or press the or cursor button to select "EXIT" then press the OK button to exit the SETUP MENU. Or press the or button to select "RETURN" then press the OK button to return the previous "SPEAKER DISTANCE" setup.
Notes:
MENU STRUCTURE of Speaker Level setup
Direct selec by remote control Speaker Distance setup Test Tone mode MANU Speaker SW Speaker Level setup SL L C AUTO (Auto)
· Speakers that you selected "None" for in the Speaker Size Setup menu will not appear. · The setup level for each channel is memorized for reproduction in all surround mode. · To adjust the speaker levels for 6. 1-channel input sources, you will need to use the 6. 1CH Level Input setup menu.
R
Listening Positiom SB
SR
TO MAIN MENU
RETURN
EXIT
MAIN MENU
Speaker Distance setup
exit SETUP MENU
22
M-CH ST
2CH
6. 1CH -IN
4. 5.
7
BASS
F. DIRECT
8
A/D
9
In this mode, the SR4300 includes three controls to fine-tune the sound-field as follow.
M-CH ST 2CH 6. 1CH -IN
0
OFF SETUP/T. TONE MENU
4. 5.
7
BASS
F. DIRECT
8
A/D
9
0
OFF SETUP/T. TONE MENU
1. When you select "TO MAIN MENU" by pressing the or button, you can return the SETUP MAIN MENU by pressing the OK button . Or press the or cursor button to select "EXIT" then press the OK button to exit the SETUP MENU.
1. 5.
Select "4. PRO LOGIC II" in SETUP MAIN MENU with or cursor button. When you select "TO MAIN MENU" by pressing the or button, you can return the SETUP MAIN MENU by pressing the OK button . Or press the or cursor button to select "EXIT" then press the OK button to exit the SETUP MENU. Panorama wraps the sound of the front left and right speakers around you for an exciting perspective. DIMENSION: Set the Dimension level between 0 and 6 level in 1 level interval with or cursor button. This can be useful to help achieve a more suitable balance from all the speakers with certain recordings. [. . . ] ± 300 kHz 60 dB Image Rejection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 kHz, ± 75 kHz Dev 800 mV AM TUNER SECTION Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 520 - 1710 kHz Signal to Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 18 kHz 70 dB AUDIO SECTION Power Output (20Hz 20kHz / THD=0. 08%) Front L&R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MARANTZ SR4300
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MARANTZ SR4300 will begin.