User manual MARANTZ VC5200

[. . . ] Model VC5200 User Guide DVD Player PAGE 2 INTRODUCTION Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVERTISSEMENT RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated `dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR EVITER LES CHOCS ELECTRIQUE, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOUD. CAUTION: This Digital Video Disc Player employs a Laser System. To ensure proper use of this product, please read this owner's manual carefully and retain for future reference, should the unit require maintenance, contact an authorized service location-see service procedure. [. . . ] If the disc is out of the guide, it may damage the disc and cause the DVD player to malfunction. Do not place anything except 3" discs or 5" discs on the disc tray. Discs can be loaded one at a time by pressing DISC SKIP or DISC SELECT (1 - 5) to rotate the carousel. AUDIO SUBTITLE ANGLE SURR. TOP MENU MENU q q SELECT /ENTER OSD RETURN ZOOM MARKER -- SEARCH DISC SKIP Caution: Do not touch the loading drawer and carousel while they are in motion, and do not attempt to rotate the carousel by hand; doing so could result in incorrect operation of the player and/or damage to the discs. 4 SCAN PLAY SKIP 4 STOP Press OPEN/CLOSE or PLAY to close the loading drawer. The disc on the tray 1 is ready to be played back. If no disc is loaded on the disc tray 1, select another disc by following step 5. PAUSE SLOW 1 4 7 CLEAR 2 5 8 0 3 6 9 PROGRAM q q Do not close the loading drawer by hand. If the disc is placed in upside down (and it is a single sided disc), "NO DISC" or "DISC ERROR" appears on the TV screen. MP3 VCD CD DVD TITLE CHP/TRK PROG. RANDOM ALL A B 2 3 1 4 5 Operating status indicator q q If you insert an audio CD, the CD indicator lights up on the display. After playing back all of the chapters in the title, the DVD player automatically stops and returns to the menu screen. BASIC OPERATION PAGE 19 Basic Playback (Cont'd) 5 If you want to select another disc, press DISC SKIP on the remote control once or more, or press DISC SELECT (1 - 5) on the front panel. Also you can select a disc in the DVD player directly by using the remote control, press DISC SKIP and then press a number button (1-5) on the remote control within one second. POWER OPEN/CLOSE SETUP REPEAT A-B RANDOM 6 Press PLAY to begin playback. Playback begins. You can skip this step if the disc is already playing automatically. AUDIO SUBTITLE ANGLE SURR. TOP MENU MENU The menu screen appears on the TV screen. SELECT /ENTER 7 RETURN DISC SKIP SKIP In the case of interactive DVDs with playback, a menu screen appears on the TV screen. Perform the following steps: OSD 7 ZOOM MARKER -- SEARCH SCAN PLAY STOP 5 5 Press D/E/F/G and press SELECT/ENTER, or press the numeric button(s), to select the desired item. Playback of the selected item begins. PAUSE SLOW 1 2 3 4 OR 1 4 7 CLEAR 2 5 8 0 3 6 9 PROGRAM Example of interactive DVD On-Screen Menu q For further information, refer to the disc jacket of the disc you are playing. After operation When the unit is not in use, remove the disc and press POWER to turn off the DVD player. Use the OPEN/CLOSE button on the remote control or DVD player to open and close the disc tray. Do not push up the disc tray or put any objects other than discs on the disc tray. Be especially careful with children's fingers around the closing disc tray as there is a risk of personal injury. When " " appears on the TV screen while a button is pressed, it means that this function is not available on the disc you are playing. Depending on the DVD disc, some operations may be different or restricted. Refer to the jacket or case of the disc you are playing. Video CD This contains recordings of pictures and sound whose quality is on a par with that of video tape. This player also supports Video CDs with playback control (Version 2. 0). If a Video CD has "playback control" written on its disc or jacket, it means that particular scenes or information can be selected for viewing interactively with the TV monitor using the menu screen. PAGE 20 BASIC OPERATION Basic Playback (Cont'd) Stopping Play POWER OPEN/CLOSE Press STOP during playback. SETUP REPEAT A-B RANDOM Resume Play q When play is stopped, the unit records the point where STOP was pressed (RESUME function). Notes AUDIO SUBTITLE ANGLE SURR. TOP MENU MENU SELECT /ENTER RETURN OSD ZOOM MARKER -- SEARCH DISC SKIP This operation works only with discs for which the elapsed playing time appears in the DVD display window during stop. Resume function will be cleared when the STOP is pressed on the STOP mode. The Resume function may not be available on some DVD discs or Video CDs (version 2. 0). SCAN PLAY SKIP PLAY STOP STOP PAUSE SLOW Last Scene Memory This player memorizes last scene for the last disc you have watched. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its settings memorized, Latest Stop Position is automatically recalled. [. . . ] (HDCD, CD-ROM, CD-Extra, CD-G, photo CD, and CD-i discs can not be played on this DVD player. ) Region Management Information Region Management Information: This DVD Player is designed and manufactured to respond to the Region Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this DVD player, this DVD player cannot play that disc. The Region number of this DVD player is 1. 1 Notes on Unauthorized Discs You may not be able to play back some DVD video discs on this player if they were purchased from outside your geographic area or made for business purposes. When you try to play back an unauthorized disc, "Check Regional Code" appears on the TV screen. Notes on Copyright It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, and rent copyrighted material without permission. DVD video discs are copy protected, and any recordings made from these discs will be distorted. [. . . ]