User manual MCINTOSH C500 TUBE OR SOLID STATE PREAMPLIFIER

[. . . ] [. . . ] It supplies the control signals and power supply voltages for the Left Channel Circuitry in the Preamplifier CD (6), CDR (5) and D/A (7) LEFT Channel INPUTS (Balanced) accept high level program source signals CDR (5) LEFT Channel OUPTUTS (Balanced) contain the selected Record Source Signal for recorders MAIN LEFT Channel OUTPUTS (Balanced) contain Listen program signals at all times or MAIN/SPKR 1 and 2 LEFT Channel OUTPUTS (Balanced) contain Listen signals and may be assigned either as two additional Main Outputs (active all the time) or switched On/Off with the Remote Control SPKR 1 and 2 Push-buttons SPKR 1 and 2 LEFT Channel OUTPUTS (unbalanced) contain Listen signals and are switched On/Off with the Remote Control SPKR 1 and 2 Push-buttons SRVR (4) and CDR (5) LEFT Channel OUPTUTS (Unbalanced) contain the selected Record Source Signal for recorders PROCESSOR LEFT Channel LISTEN TO and FROM allow an external signal processor to be connected for use in the Listen mode PROCESSOR LEFT Channel RECORD TO and FROM allow an external signal processor to be connected for use in the Record mode PROCESSOR RIGHT Channel LISTEN TO and FROM allow an external signal processor to be connected for use in the Listen mode PROCESSOR RIGHT Channel RECORD TO and FROM allows an external signal processor to be connected for use in the Record mode TUNER (3), DVD (1), SRVR (4) and AUX (2), RIGHT Channel INPUTS (un-balanced) accept high level program source signals PHONO INPUTS RIGHT MM (8) accepts signals from a Moving Magnet Phono Cartridge. MC (9) Input accepts the low level signals from a Moving Coil Phono Cartridge GND (Ground) connectors for connecting the Turntable Ground Wire to the C500P or C500T Chassis PHONO INPUTS LEFT MM (8) accepts signals from a Moving Magnet Phono Cartridge. MC (9) Input accepts the low level signals from a Moving Coil Phono Cartridge TUNER (3), DVD (1), SRVR (4) and AUX (2), LEFT Channel INPUTS (un-balanced) accept high level program source signals McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549 Part No. [. . . ] [. . . ]