User manual MCINTOSH MCD500 SACD/CD PLAYER

[. . . ] MCD500 SACD/CD Player The new McIntosh MCD500 SACD/CD Player with Digital Inputs combines exceptional sound quality and flexibility with a unique parallel DAC topology. [. . . ] Additionally, all internal clocks are generated by a phase-locked loop generator yielding stable, low jitter operation for truly error-free performance. The MCD500 analog stages employ a differential balanced topology for wide dynamic range and the best possible fidelity. Both fixed and variable outputs are supported and a dedicated high-performance headphone amplifier with 1/4" jack is provided. ". . . enable the best performance possible from your McIntosh components" Four DACS per Channel Die-cast Disc Tray 2X-speed Disc Reading Digital Inputs Variable Output w/ Volume Control Low Impedance Headphone Stage with 1/4" Jack legendary MCD500 SACD/CD player parallel DaC tOpOlOgy Four DACs per channel are arranged in a balanced parallel configuration for the most accurate reconstruction of the analog waveform. Digital inputs Two selectable digital inputs are provided for use with external digital sources like the MS750 Music Server. Indeed, the MCD500 has the potential to improve the sound of any digital music source. Drive MeCHanisM Die-cast, wrap-around chassis with a steel top cover dampens resonances for silent, error free operation disc reading. DisC reaDing CDs are read into buffer memory at 2X normal speed for enhanced accuracy. pOwer supply A premium linear power supply features an R-Core transformer and nested regulation providing super stable DC voltage as required by the high performance digital circuits utilized. FixeD Output level 2. 0Vrms Unbalanced 4. 0Vrms Balanced variable Output level 0 - 6. 0Vrms Unbalanced 0 - 12. 0Vrms Balanced Output iMpeDanCe 600 Ohms Unbalanced and Balanced FrequenCy respOnse 4Hz to 40, 000Hz, +0. 5, -2dB (SACD) 4Hz to 20, 000Hz, ±0. 5dB (CD) signal tO nOise ratiO Better than 110dB (A-weighted) DynaMiC range Better than 100dB HarMOniC DistOrtiOn 0. 0015% @ 1000Hz (SACD) 0. 0015% @ 1000Hz (CD) CHannel separatiOn Better than 98dB (1, 000Hz) Digital input Optical: -15dbm to -21dbm (PCM1 ­ CD Format only) Coaxial: 0. 5V p-p/75 Ohm (PCM1 ­ CD Format only) Sampling Frequencies: 44. 1kHz (PCM1) Digital Output Optical: -15dbm to -21dbm (PCM1 ­ CD Format only) Coaxial: 0. 5V p-p/75 Ohm (PCM1 ­ CD Format only) Sampling Frequencies: 44. 1kHz (PCM1) transpOrt Laser Type: Twin Beam Laser Beam Wavelength: 650nm (SACD)/790nm (CD) Laser Power: CLASS IIa/CLASS I pOwer requireMents 100 Volts, 50/60Hz at 35 Watts 110 Volts, 50/60Hz at 35 Watts 120 Volts, 50/60Hz at 35 Watts 220 Volts, 50/60Hz at 35 Watts 230 Volts, 50/60Hz at 35 Watts 240 Volts, 50/60Hz at 35 Watts Standby: Less than 1 Watt Note: Refer to the rear panel of the MCD500 for the correct voltage. Overall DiMensiOns (H x w x D) 6" (15. 24cm) x 17-1/2" (44. 45cm) x 16-1/2" (41. 91cm) Note: When the Disc Tray is opened, the panel clearance required in front of mounting panel is 6-3/4" (17. 2cm). (20. 2Kg) in shipping carton FOr tHe COnsuMer's prOteCtiOn In order to ensure the highest level of customer satisfaction, "new" McIntosh products may only be purchased over-thecounter or delivered and installed by an Authorized McIntosh Dealer. [. . . ] McIntosh does not warrant, in any way, products that are purchased from anyone who is not an Authorized Dealer or products that have had their serial number altered or defaced. MCD500 PCM1 (Pulse Code Modulation) Digital Signal type used for CD Discs 35010200 To experience the legendary performance of McIntosh, please call on us at 1-800-538-6576 www. mcintoshlabs. com legendary [. . . ]