User manual MYRYAD MXD6000

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MYRYAD MXD6000. We hope that this MYRYAD MXD6000 user guide will be useful to you.


MYRYAD MXD6000 : Download the complete user guide (180 Ko)

Manual abstract: user guide MYRYAD MXD6000

Detailed instructions for use are in the User's Guide.

[. . . ] MXD6000 Digital Preamplifier Processor Owner's Manual § CONTENTS § § § § § § § § § § § § § § § § § § § § § Introduction Installation and safety notes Accessories Setting up your system Rear Panel connections Operating your system Front panel controls Remote control handset operation Setup menus - Introduction Audio setup menu Speaker setup menu Source setup menu Display setup menu Trigger setup menu Using the remote control in CD and DVD modes Re-programming the remote Installing and replacing batteries Zone B operation Trouble-shooting guide APPENDIX: Details of decoding and processing modes Specifications 2 2 2 3 3 5 5 7 8 9 9 10 11 11 INTRODUCTION The Myryad MXD6000 Digital PreamplifierProcessor has been designed to offer a combination of high quality audio and video performance with simple yet elegant styling. The MXD6000 forms the heart of a high-end home cinema and audio system and should be used with high quality power amplifiers such as the Myryad MXA 2150, MXA 3150, MXA5150 and MXA 7150 two, three, five and seven channel power amplifiers. The MXD6000 can decode a wide variety of discrete surround material including Dolby Digital1, Dolby Digital Surround EX1, DTS2, DTS-ES Matrix and Discrete2, DTS Neo:6 2 and a proprietary mode "Surround 6. 1" ­ together with the ability to down-mix any source to mono or stereo. It also functions as a high quality stereo preamplifier and any stereo analogue source can be sampled at 48kHz for further digital processing, or at 96kHz for the best sound quality without any further processing. [. . . ] Mode + and These keys function in exactly the same way as the front panel MODE button, but allow selection up and down through the available modes. Trim + and These keys are for trimming speaker levels in LEVEL mode or speaker distances in DELAY (distance) mode. First press LEVEL (or DELAY) and then adjust the relevant parameter using these keys. If LEVEL (or DELAY) has not been pressed the keys function as temporary Subwoofer level trims (not stored in memory) and this temporary trim level is shown briefly in the bottom right hand corner of the OSD. In the Speaker level setup menu the TRIM keys can be used to adjust the level of the currently active speaker during TEST noise calibration. Level This key switches on LEVEL Trim mode and will cycle though the channels for trimming ­ shown in the front panel display only, not the OSD. The key is pressed once to enter level setup mode and select the Left Front channel. The TRIM + and - keys are then used to adjust the Left Front speaker level, either using programme material, or the TEST noise source (see above). If the TEST key is pressed the system will cycle automatically through the channels. If the Level is being trimmed using programme material then the LEVEL key should be pressed again to advance to the Centre channel and so on until all the channels have been trimmed, when the system will exit LEVEL mode automatically. Delay This key switches on DELAY (= distance) setup mode and will cycle though all active channels (including subwoofer) for setting up the distance from the listener to each speaker ­ shown in the front panel display only, not the OSD. The key is pressed once to enter delay setup mode and select the Left channel. The TRIM + and - keys are then used to set the distance to the Left speaker. Press the DELAY key again to advance to the Centre speaker to set its distance, followed by the Right speaker and so on. The last selected speaker is "Subwoofer" one further press of the DELAY key will exit DELAY setup mode. Note: the delays are not active on the 7. 1 Channel input as these signals remain in the analogue domain. The main menu lists the sub-menus that can be selected using the UP and DOWN keys and accessed by pressing the SEL key. · · · · · Audio setup: bass and treble tone controls, LFE level, Dolby Pro Logic II setup and preset setups Speaker setup defines speaker levels, distances and sizes Source setup defines source-related parameters Display setup sets video formats and defines how the OSD (On Screen Display) works Trigger setup sets the parameters for the TRIGGER outputs Exit returns to normal operation mode. USING THE SETUP MENUS ­ VIA THE ON SCREEN DISPLAY OR FRONT PANEL DISPLAY The setup menus are accessed by pressing the MENU key on the remote controller. The UP, DOWN, LEFT and RIGHT arrow keys (·, , , , , , ) are used to navigate in the menus. The menus are shown below as they appear on the On Screen Display (OSD). The UP (·) and DOWN (, ) keys are used to move the cursor within the menu to highlight a sub-menu or function to be adjusted. To select a sub-menu press the SEL key in the middle of the cursor keys. The front panel display will show only the title line and one other line of the menu, commencing with the top line. [. . . ] The front panel display will indicate the Zone B source and volume setting. · Whist in Zone B control mode the following operations are possible: · Select Zone B source, using either the front panel or remote source?The newly selected Zone B source will be shown on the front panel display. Set Zone B volume using either the front panel rotary volume control or the remote volume ?If the MUTE key on remote control is pressed, only the Zone B audio output will be muted. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MYRYAD MXD6000




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MYRYAD MXD6000 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.