User manual NAPCO C 200 AP DATASHEET

[. . . ] C200AP NAPCO's Adaptive® Dual Microwave/PIR Detectors continuously adjust to their environment, providing 100lb. (45. 4kg) pet/animal immunity and ultimate reliability & false alarm protection Upon installation, a NAPCO Adaptive Microwave/PIR Detector powers up, initialized in the first of its 12 senstivity modes, i. e. , the most sensitive, enabling it to sample prevailing environmental conditions. Faced with hostility or tranquility, the Adaptive detector automatically selects the most appropriate detection mode accordingly, optimizing both intruder catch and stability. [. . . ] This ensures intruder "catch" sensitivity is optimized minute-by-minute, while "phantom" false alarm sources, such as pets/animals, fans, sunlight, HVAC, are simultaneously counteracted. The on-board A to D conversion microprocessor (Analog-to-Digital) analyzes all incoming microwave and PIR detected signals against its built in library of waveform signatures of known false alarm sources, like heaters, fans, blowing drapes/ blinds and animals. The product of decades of sensor engineering and expertise, this inherent signal processing intelligence, enables Adaptive® Detectors provides unsurpassed false alarm discrimination the reliability and accuracy will save both time and money. · P. E. T. TM - Profile Enhanced Targeting for revolutionary 100lb. Intelligently distinguishes animals, when present, from intruders; then automatically resensitizes when pets vacate protected areas. · 12 automatically-selected, dynamic Adaptive® detection modes for optimal "intruder catch" and stability. The detector combines the strengths of both heat- and motion-sensitive detection technologies to dually verify alarm conditions for ideal false alarm discrimination. · "Smarter System" Panel and Sensor Integration Input: Automatically coordinates sensor sensitivity with panel status (armed, disarmed, arming in process, etc. ) · Active, automatic self-testing of all key components and circuits. The unit will internally generate both a PIR signal and a microwave signal, in intervals of 11- 16 hours, which will fully test both channels independently. Any failure or internal trouble will be reported to the system for quick remedy, avoiding any false sense of security or breach thereof. Key components and resilient SMD circuitry are electronically-shielded to 30V/m. This protects the unit's proper performance from nuisance interference due to static discharge, power surges, electric spikes, etc. · 2 Vari-Pet field-changeable lenses supplied for application optimized field-of-view. Napco's custom-engineered aspheric fresnel lenses are carefully designed to provide the ideal wide angle lens array and are easily-aimable during installation. [. . . ] · Compliances: UL, CUL, CE, INCERT, NFA2P, NCP SPECIFICATIONS · 40' x 40' (10. 6m2) Maximum Range (dependent upon Vari-Pet Lens Installed) · Operating Temperature: -10 to +50 degrees C (14 to 122 degrees F) · Mounting: · Output Relay: · Relay Time: · Alarm Relay: · Trouble: · Status Input: · Self-Test Interval: · Power Supply: · Current Drain: · Microwave: · Dimensions: · Shipping Weight: Wall or Corner, 7 to 8' maximum Form A; Normally Closed Approx. 4 seconds 100mA, 24Vdc w/internal 10 ohm current-limiting resistor Open collector current sinking with 39 ohm current limiting resistor, 20mA, max Panel disarmed, >5V armed, <1. 5V 11-16 hours Filtered 12Vdc Idle 33mA; Alarm 35mA 10. 525GHz ± 25MHz 4. 5H x 2. 5W x 2. 3"D (11. 4x6. 4 x 5. 8 cm) 7 oz. (200 gm) NAPCO SECURITY GROUP In North America 1-800-645-9445 · 631-842-9400 333 Bayview Avenue, Amityville, New York 11701 USA www. napcosecurity. com International 224 Europa Blvd, Gemini Business Park Warrington WA5 7TN England UK 44 (0) 1925242428 Publicly traded on NASDAQ NSSC NAPCO Product Availability Hotline ­ Call our Stock-Out Hotline at 1-800-645-9330 Press 1, pause then 2. [. . . ]