User manual NAPCO SL-1SVC-1YR DATASHEET

[. . . ] Affordable full data wireless alarm communicator Full Data Wireless Alarm Communicator with Telephone Line Connection & Monitoring Full FULL DA TA FULL DATA data contact ID or 4/2 communications. [. . . ] · Easy to activate and program via telephone voice prompts or online at www. napcosecurity. com or www. napcostarlink. net ; automatic dialer capture for minimal programming. · SIM card included · Self-monitoring of unit's performance for reliability · Universally transmits alarm reports to any central station supporting standard all CS formats (contact ID or 4/2), without requiring any additional CS equipment · Durable aluminum housing (Optionally accommodates 1/2" EMT for wiring protection and standard 3/8" recessed magnetic contact for supervised tamper. ) · EMI-/RFI-shielded electronics ensures dependability · Automatic signal-strength indicator on power up for dependable installation peace of mind (Visual LED indicator strength scale 1 to 5) · Powerful transmission; Maximum FCC-allowable RF output StarLink Full Data SL-1FD-T Uses GSM/GPRS national network Note: Radio activation requires one-year GPRS subscription. StarLink Full Data, primary or backup wireless alarm communicator, with Telephone Line Connection & Monitoring: Easy installation with any control panel brand communicating with contact ID or 4/2 Superior Performance · Universally compatible to support full data of all alarm panel brands using Contact ID and 4/2 formats Specifications Electrical Input Voltage: 12. 5VDC ± 15% Maximum Current: 2 AMPS (for less than 1 second) Standby Current: 20mA Physical Dimensions: 7. 56" H x 3. 1" W x 1. 4" D (+4"H for antenna) Mounting: #6 Screw Holes (4) Input Connector: 5mm Screw Terminal Output Connector: Flexible rubber antenna, 3. 8"L (note: not as shown) Environmental Temperature: -30°C - 55°C (-22°F - 131°F) Humidity: 95% Non-Condensing Ordering Information: SL-1-FD-T StarLink Full Data Wireless Alarm Communicator with telephone line monitoring. SL-1SVC-1YR One year reporting service for radio, icnlduign online maintenance at www. NapcoStarLink. net (call customer services at 1-800-645-9445 to order service. ) SL-1-FD-T/12 StarLink Full Data Wireless Alarm Communicator with telephone line monitoring, also includes 12-months reporting service and online maintenance on www. NapcoStarLink. net SL-1FD Similar to SL-1FD-T, but without telephone line monitoring capability. (Note: Full alarm data is always communicated wirelessly on GMS network. ) WI1740 Installation Instructions for SL-1FD Series Alarm Communicators. · Requires no additional central station equipment ·Uses GPRS data channel of GSM Network for affordable, dependable, high-speed alarm communications supported by an extensive Nationwide network (SIM card included) · Supervisory test signals verify StarLink's ability to both talk to and hear the network · Low standby current (<20mA ) maximizes protection when both AC loss and Telco loss occurs (common during natural disasters) · Rugged aluminum enclosure and durable antenna provides vandal- and RFI-protection · Maximum FCC-allowable RF output Easier Installation · Fast hook-up with as few as 4 wires, no dip switches to set either. [. . . ] · Signal strength annunciated by SL-1's LED, on a scale of 1 to 5 · Low standby current ( <20mA ) allows StarLink to be powered from existing alarm control panel/ battery · Ultra-compact, rugged aluminum enclosure accepts standard 1/2" EMT for wiring protection and standard 3/8" recessed magnetic contact for tamper-proof protection 1-800-645-9445 · www. napcosecurity. com 333 Bayview Avenue, Amityville, New York 11701 USA © NAPCO, StarLink is a trademark of NAPCO. [. . . ]