User manual NOKIA MOBILE HOLDER CR-116
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual NOKIA MOBILE HOLDER CR-116. We hope that this NOKIA MOBILE HOLDER CR-116 user guide will be useful to you.
You may also download the following manuals related to this product:
NOKIA MOBILE HOLDER CR-116 (135 ko)
NOKIA MOBILE HOLDER CR-116 (134 ko)
NOKIA MOBILE HOLDER CR-116 (134 ko)
NOKIA MOBILE HOLDER CR-116 (134 ko)
NOKIA MOBILE HOLDER CR-116 (134 ko)
Manual abstract: user guide NOKIA MOBILE HOLDER CR-116
Detailed instructions for use are in the User's Guide.
[. . . ] Nokia Holder Easy Mount HH-20 and CR-116/117
1
B
D
C
E
A
9218602/2
2
A
D C
F G E
B
3 4 5
6
7
10
9 8 11
ENGLISH
© 2009-2010 Nokia. Nokia, Nokia Connecting People and the Nokia Original Accessories logo are trademarks or registered trademarks of Nokia Corporation.
Introduction
The Nokia Holder Easy Mount HH-20 is a mounting device that allows you to attach your compatible mobile holder to the windscreen or, using the optional adhesive pad, to the dashboard of your vehicle. [. . . ] For your safety, install the holder in the upright position.
Attach to a windscreen
Attach the holder to the mounting device
To attach the mobile holder to the mounting device, insert the catch on the mounting device into the slot at the back of the holder (see step 1A at the start of this guide). Rotate the holder clockwise about 90 degrees until it locks into place (1B). To detach the holder from the mounting device, rotate it anticlockwise.
Attach the mounting device to the windscreen
Before you attach the mounting device to the windscreen, locate a safe mounting surface on the windscreen,
ENGLISH
and clean the surface thoroughly with a glass cleaner and a clean towel. If the ambient temperature is below +15°C (60°F), carefully warm the surface and the suction cup with a hair dryer to ensure a firm grip on the windscreen. Ensure that you do not heat the windscreen excessively to avoid damage to it. Press the suction cup of the mounting device against the windscreen (see step 1C), and rotate the ring on the mounting device clockwise (1D) to create a vacuum between the suction cup and the windscreen. To detach the suction cup from the windscreen, rotate the ring on the mounting device anticlockwise (9), pull the strap located on the edge of the suction cup (10), and pull the holder with the mounting device from the windscreen (11).
Attach to a dashboard
Attach the mounting device to the dashboard
If the product was supplied with an adhesive pad, you can attach the mounting device to the dashboard. Ensure that the surface where you attach the adhesive pad on the dashboard is flat, dry, and free from dirt and dust. Peel off the protective sheet from the adhesive side of the pad (see step 2A), and press the pad against the dashboard so that it stays firmly in place. When you peel off the
ENGLISH
protective sheet from the pad, do not touch the adhesive side. Rotate the ring on the mounting device clockwise (2D) to create a vacuum between the suction cup and the pad. To detach the suction cup from the pad, proceed in the same way as when you detach the cup from a windscreen (9, 10, and 11).
Attach the holder to the mounting device
To attach the mobile holder to the mounting device, insert the catch on the mounting device into the slot at the back of the holder (see step 2E). [. . . ] The following suggestions will help you protect your warranty coverage. · Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE NOKIA MOBILE HOLDER CR-116
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual NOKIA MOBILE HOLDER CR-116 will begin.