Detailed instructions for use are in the User's Guide.
[. . . ] To disconnect one party: Press the line or intercom button of the caller you want to disconnect, then press . Press the line or intercom button of the remaining caller to resume your conversation. To independently hold two calls: Press the line or intercom button of the first caller, then press . To re-establish the conference, retrieve one call from hold, press <, then retrieve the second call from hold.
Contrast adjustment
Adjust the contrast of your display. [. . . ] Press to set your choice.
Dialing modes
Choose one of three methods of dialing. (Standard Dial is always available, even when another dialing mode is selected. ) Automatic Dial: Dial the number without choosing a line button first. Pre-Dial: Dial the number, then press a line button to place the call. Edit the number by pressing before placing the call.
Do Not Disturb Group Listening Hold
fi
Cancel fi
When you are not on a call, to prevent all incoming calls, except priority calls, from ringing at your telephone. When you are on a call, block an incoming priority call.
,
Cancel ,
Use both the handset and speaker while you are on a call. To avoid electronic feedback, keep the handset away from the speaker during the call, and press to hang up.
Temporarily suspend a call. To retrieve a held call, press the button next to the flashing indicator. (Press on the M7100 telephone. ) Exclusive Hold
or Temporarily suspend a call and prevent other telephones from picking it up.
Language Choice
fi, /
Select English as the language for the telephone display.
fi,
Select French as the language for the telephone display.
fi, <
Select Spanish as the language for the telephone display.
Last Number Redial Line pools
fi
Automatically redial the last external telephone number that you dialed.
fl>
With a line pool, telephones can share several lines for making calls. (See your system coordinator for a list. )
Line Redirection
>
Cancel >
Send calls arriving on an external line to another telephone outside your Norstar system. See your system coordinator. ) This feature is not available on the M7100 telephone.
Link Long Tones
/
Generate a Link signal to access a PBX or other host exchange.
,
Generate a tone for as long as you hold down a button. Ringing service
/
Cancel /
Turn on one of six schedules for alternative ringing/call answering arrangements from a designated control telephone. Restriction services
Cancel
Turn on one of six schedules for alternative restrictions on particular lines or telephones from a designated control telephone. Routing services
<
Cancel <
Turn on one of six schedules for alternative routing on particular lines or telephones from a designated control telephone. You are required to enter the System Coordinator password.
Speed Dial
,
Dial an external telephone number using a two-digit code. There are two types of speed dial codes: system (01 to 70) and personal (71 to 94). System speed dial codes can be used from any Norstar telephone in the system. Enter the two-digit code for the number (01 to 70 for system speed dial, 71 to 94 for User Speed Dial).
Page 7
To program User Speed Dial numbers: 1. Specify the external line by pressing a line button, a line pool button, or the intercom button. If you don't specify the line, the system automatically chooses a line for the call. You cannot program User Speed Dial numbers while someone else is programming your Norstar system.
System Answer Test a telephone Time
</
Turn System Answer on or off. [. . . ] You cannot program User Speed Dial numbers while someone else is programming your Norstar system.
System Answer Test a telephone Time
</
Turn System Answer on or off. You must enter the System Coordinator or Basic password.
, fi
Test the telephone display, buttons, speaker, handset or headset (if available) and power supply. See the System Coordinator Guide for further instructions.
, <
Briefly display the time and date while you are on a call.
, fl
Time & date
Cancel , fl
Replace message or call information on the display with the time and date.
~
Enter a password provided by your system coordinator to change the time and date on all sets with a display in your Norstar system.
Transfer
,
Send a call to another telephone within your Norstar system, or to an external telephone. You may not be able to transfer a call on an external line to an external telephone, depending on the capabilities of the lines. [. . . ]