User manual OCZ Z SERIES 850W
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual OCZ Z SERIES 850W. We hope that this OCZ Z SERIES 850W user guide will be useful to you.
 |
OCZ Z SERIES 850W : Download the complete user guide (1327 Ko) |
Manual abstract: user guide OCZ Z SERIES 850W
Detailed instructions for use are in the User's Guide.
[. . . ] NOTE: You will need a Philips screwdriver to install your new power supply. Make sure to disconnect all other cables from the PC and remove the cover from the PC case. [. . . ] If you are using a graphics card with a 6-pin connector please connect the respective connector to the jack on the card. If your card supports more than one jack connect the second 8-pin connector. If your card has an 8-pin jack mounted just use the additional two pins beside the regular 6-pin connector to form an 8-pin connector. Proceed with connecting all Molex and SATA connectors to your hard drives and optical drives. Connect any other internal components that require power to the appropriate connector- i. You may replace the cover on the PC case now, or you can leave it off initially while you verify everything works properly. Connect your display, keyboard, mouse, speakers, printer, and any other peripherals to your computer. Plug in the main AC power cable into the back of the power supply and turn on your computer. If everything works properly and you have not already done so, turn your computer off and replace the cover on the case. If you experience any problems with your new power supply, please check these simple trouble-shooting steps or consult the retailer where the product was purchased. If you are not familiar with the steps taken please consult a professional. If your power supply has developed traces of smoke, broken cables, or was exposed to liquids it should not under any circumstances be brought back into operation. If you installed a new power supply and the system will no longer start, please check the following steps: 1. Make sure the AC input is plugged in correctly and the wall outlet distributes power. [. . . ] If any defects should occur during this period, contact OCZ Technology for further assistance and to take advantage of your warranty. To place a Returned Merchandise Authorization [RMA] request, you may simply submit a ticket through our website at: http://www. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE OCZ Z SERIES 850W
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual OCZ Z SERIES 850W will begin.