User manual OPTICOM IR-2493 DATASHEET
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual OPTICOM IR-2493. We hope that this OPTICOM IR-2493 user guide will be useful to you.
You may also download the following manuals related to this product:
OPTICOM IR-2493 DATASHEET 2 (770 ko)
Manual abstract: user guide OPTICOM IR-2493DATASHEET
Detailed instructions for use are in the User's Guide.
[. . . ] SDVR Series DVR server and the software included with your system are subject to the limited warranty set forth in the warranty and license agreement enclosed with the respective products. All software is licensed AS IS, as described in the license agreement enclosed with the software disk. Further, we reserve the right to make changes in the specifications of the products described in this manual at any time without notice, and without obligation to notify any person of such changes.
Cautions
This product has multiple-rated voltages (110v and 220v). To avoid of risk of explosion, do not replace the battery on the main board by anything other than a Lithium battery. [. . . ] Registration Check the MAC address of DVR from Setup>System>Description. Please contact a distributor or an installer to register your DVR on a DDNS Server. After the domain name and MAC address of the DVR are registered on a DDNS server, user can access the network with their own domain name. Ports When you connect one or more DVRs to a network through an IP sharing device, each device must have a unique TCP port number for access to each unit from outside the LAN. Also, the IP sharing device must be configured for port forwarding so when each port is accessed on the IP sharing device, it will forward to the appropriate DVR. Note: This port number is listed next to the Port menu option in the Network Setup screen. If you plan to access the DVR units only from within the same LAN, the TCP port does not have to be changed. Network access beyond Router In order to access beyond Router (Firewall), user must open 1 TCP port for Command level, Live channels, and Storage channels. If this port is not opened properly, user can not access DVR beyond a router. If DVR sets port number with 5445, user has to open 1 TCP port of 5445.
21
3-5-2. (See your network administrator if you do not have this information. ) 2. Refer to Table 4. 1. 1 for the meanings of the indicators.
Figure 4. 1. 1. Indicator ICONS in Live window Indicator Continuous recording in progress Manual recording in progress Sensor alarm recording in progress Motion alarm recording in progress Indicates no alarm event Alarm indicator. When there is an alarm (sensor alarm or motion alarm) in the video channel, this icon will be highlighted in bright red. Indicates the HDD is being recycled Indicates the percentage of recorded data into HDD Indicates there is no video signal input Description
26
Table 4. 1. 2. Button functions of remote controller in Live window Button Description
Select channel to be displayed in full screen mode.
Switch between full screen and quad display mode.
SEQ RECORD SEARCH
Press to start auto sequencing of the screen in full screen mode. Event search /Time line search /Log /Archive search Press to capture a still image. Press for temporal storage of the changed value or to return to the previous menu screen.
ARCH SETUP ESC
27
4-2. When you press the Search button, DVR asks for a password as in Figure 4-2-1. There are 7 ways of search menu such as TIMELINE, EVENT, GO TO FIRST TIME, GO TO LAST TIME, GO TO SPECIFIC TIME, LOG, and ARCHIVE on the screen.
Figure 4. 2. 1. Three categories of search filters can be applied: DATE, CHANNEL and TYPE. Press SEL to select a value and move down to the next category and use the UP arrow button to move up to the categories you have previously entered. [. . . ] You can also choose to overwrite data or stop recording when the maximum amount of disk space is full.
42
7. Network By an web-browser viewer
The DVR provides a live remote monitoring feature by web-browser viewer.
7-1. User needs to access http://ns. standalone4ch. com/webview2/ to get a web browser viewer. Click "YES" to download Web Browser Viewer from the server run by the manufacturer.
2. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE OPTICOM IR-2493
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual OPTICOM IR-2493 will begin.