User manual PIONEER VSX-21
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PIONEER VSX-21. We hope that this PIONEER VSX-21 user guide will be useful to you.
Manual abstract: user guide PIONEER VSX-21
Detailed instructions for use are in the User's Guide.
[. . . ] AUDIO/VIDEO MULTI-CHANNEL RECEIVER
VSX-21
Operating Instructions
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
IMPORTANT NOTICE
The serial number for this equipment is located on the rear panel. Please write this serial number on your enclosed warranty card and keep it in a secure area. [. . . ] · [TUNER operations (press TUNER first)] Number buttons (0~9) : During preset tuning, use to input the number of the preset station. CLASS (+10) : Press repeatedly to switch the preset station classes during preset tuning. MENU : Press to activate direct tuning.
0
RECEIVER TV
SET UP
1 2 3
G TIN MU
TV
FQ +
ENTER
FU NC
-
FQ
4 5 6
VOL
CHANNEL
VOL
MULTI CONTROL
DVD/LD
TV/SAT
TV CONTROL RECEIVER
CD
TUNER MD/TAPE
MIDNIGHT
VCR 1 VCR 2 1
=
DSP MODE
2 6 0
3 7
EFFECT
4 8
MEMU
TV/VCR
CH. SELECT TEST TONE
ATT SIG. SELECT
7 8 9
5 9
FUNCTION MODE CHECK
CN. LEVEL
+10
CLASS
DIRECT
FL DIMMER COMMANDER SET UP
~ !@
Î
AUDIO/VIDEO PRE-PROGRAMMED REMOTE CONTROL UNIT
8 FUNCTION button 1 RECEIVER button
Press to switch the receiver on or to put in standby. Press repeatedly to select a source.
OPERATION
9 MODE CHECK button
Press to confirm the current remote operation mode and to switch operation modes without changing the source (refer to page 51).
2 MUTING button
Press to mute the volume. Press again to cancel.
3 %~fi~@~#~ENTER buttons
Specific use of these buttons is described in conjunction with the operations they are used in. ENTER : Press to switch the band (FM/AM) when using the tuner.
0 Power button
Press to turn on or put in standby all connected components other than this unit.
- TV/TV FUNC button
Press TV to turn the TV's power on or put in standby. Press TV FUNC to select the TV for remote control operation.
4 VOL (+/) buttons
Press to adjust the volume. When VOL (+/) buttons are pressed while muting, muting is canceled.
= RECEIVER button
Press to select the receiver for remote control operation.
5 CHANNEL (+/) button
Use to select preset stations when operating the tuner. When the remote is used to control other components, this button may be used to change channels, tracks, or chapters.
~ FL DIMMER button
Press to adjust the brightness of the fluorescent display. Four levels of brightness ranging from very dim to very bright can be selected.
6 MULTI CONTROL buttons
Use these buttons to select the remote operation mode. For example, pressing TUNER sets the remote to operate the tuner functions.
!COMMANDER SET UP button
Use to customize the remote control functions. (Refer to "Setting Up the Remote Control" starting on page 22. )
@ DIRECT button
Use to playback original source audio. When DIRECT is ON, Dolby, DSP, LOUDNESS, DIGITAL NR and MIDNIGHT mode are automatically turned OFF.
25
<ARB7181>
Names of Parts and Basic Operations
Front Panel
1 2 3 4 56 7 8 9 0 = ~!@#$ % ^ &
AUDIO/VIDEO MUL TI-CHANNEL RECEIVER MASTER V OLUME ST ANDBY
CLASS ST ANDBY/ON
MEMORY
MPX MODE
/ DTS
DSP MODE
Cinema Re - EQ
ST TION A
TUNING SELECT
SIGNAL SELECT
MIDNIGHT
DIGIT AL NR
FREQUENCY
DO WN
UP
B ASS SPEAKERS PHONES LOUDNESS
TREBLE
+
+
DIRECT
T APE 2 MONIT OR S-VIDEO
VIDEO INPUT VIDEO L A UDIO R
R
TM
VCR 1 VCR 2 D VD/LD TV/SA T CD FM/AM MD/T APE 1 VIDEO
D VD 5. 1CH
*
(
)
_
+
1
STANDBY/ON button
Press to switch the receiver on or put in standby. (Please note that this receiver consumes a small amount of power (2. 5 W) during the standby mode. )
9 BASS (+/) button
Press to adjust low frequencies in the range of ±6.
2 STANDBY indicator
0 Display (Refer to page 24) - TREBLE (+/) button
Used to adjust high frequencies in the range of ±6.
3 CLASS button
Press repeatedly to switch the preset station classes. (Refer to "Memorizing Frequency Tuned Stations" on page 38 and "Recalling the Memorizing Stations" on page 39)
= DIRECT button
Switches direct playback on or off. Use to bypass the receiver's tone control circuitry or level control for higher fidelity to the program source. When DIRECT is ON, Dolby, DSP, LOUDNESS, DIGITAL NR and MIDNIGHT mode are automatically turned OFF.
4 MEMORY button
Press to memorize a preset station. (Refer to "Memorizing Frequency Tuned Stations" on page 38)
~ Remote sensor
Point the remote control toward the remote sensor to operate the receiver.
5 MPX MODE button
Press to switch between auto stereo and monaural ("MONO") reception of FM broadcasts. When the broadcast signal is weak, selecting "MONO" will improve the sound quality.
!
/DTS button
Press repeatedly to select the standard Dolby/DTS mode and the ADVANCED THEATER modes. (Refer to page 30, 32)
6 TUNING SELECT button
Press to switch between STATION and FREQUENCY.
@ SIGNAL SELECT button
Use to select input signals for the digital components. [. . . ] To establish a safe level: · Start your volume control at a low setting. · Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. Once you have established a comfortable sound level: · Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or loss in the future. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PIONEER VSX-21
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PIONEER VSX-21 will begin.