User manual PSE ARCHERY COMPOUND BOW

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PSE ARCHERY COMPOUND BOW. We hope that this PSE ARCHERY COMPOUND BOW user guide will be useful to you.


PSE ARCHERY COMPOUND BOW : Download the complete user guide (395 Ko)

Manual abstract: user guide PSE ARCHERY COMPOUND BOW

Detailed instructions for use are in the User's Guide.

[. . . ] BOX 5487 TUCSON, AZ 85703 2 Precision Shooting Equipment, Inc. Compound Bow User's Guide BOW TERMINOLOGY Thank you from the entire PSE family for purchasing a PSE bow. Your PSE bow was manufactured from the finest materials available and handcrafted with pride in the USA. With proper care and use you will enjoy this product for years to come. We at PSE wish you much success in the archery field you have chosen to pursue. [. . . ] On bows using an offset cable guard rod, adjustments must be done with the rod in the up position (approximately 1 o'clock) as shown in Figure B (11 o'clock for left handed bows). Excessive arrow clearance may cause the cable to track incorrectly on the wheels and cause personal injury and/or damage to the bow. Figure A Figure B 5 INSTALLATION OF ACCESSORIES Arrowrest/Overdraw: The arrowrest or overdraw should be installed according to the instructions received with the product. It is usually mounted to the riser in the threaded hole on the side opposite the shelf (hole "A") using the hardware provided with the arrowrest or overdraw. Sight: The sight should be installed according to the instructions received with the product. It is usually mounted to the riser in the threaded holes (holes "B") on the side opposite the shelf using the hardware provided with the sight. Stabilizer: The stabilizer should be mounted according to the manufacturer's recommendation. It is usually mounted in the threaded hole on the front of the riser (hole "C"). Bow Sling: The bow sling attaches to the riser of the bow generally with the stabilizer. If a stabilizer is not used, attach the sling to the riser with the correct sized bolt using the hole provided for the stabilizer (hole "C"). Holes B Hole A OTHER ADJUSTMENTS Draw Weight: Your bow is factory-set to within 2 lbs. of the peak draw weight indicated on the label on the lower limb of the bow. Changes in draw weight can be made by turning the limb bolt in or out. Before making any changes in weight, turn the limb bolt clockwise until it no longer moves. Never use extreme torque when turning the bolt or damage to the limb may occur. The limb bolt then may be turned counterclockwise to obtain the desired weight, but NEVER more than 4 turns or revolutions. CAUTION: On some bow models, the limb bolt locking screw MUST be loosened BEFORE adjusting. Each one comes from the factory set-up and ready to use but there may be occasions where you need to adjust the characteristics of your bow. In some cases you will need a PSE Tune Chart to determine what to adjust, and you may need to see a PSE Dealer for information. If you are not sure of the adjustment you are making, stop and see your PSE Dealer for assistance. In all cases, an appropriate bow press will be needed to make adjustments to cams and wheels. If you do not have an appropriate press, see your PSE Dealer. Hole C Your Authorized PSE Dealer is supplied with technical information on PSE bows and cams. Please see your Dealer for assistance when making these adjustments. 6 CAM ADJUSTMENTS CENTERFIRETM, RIMFIRETM & NRGTM ONE CAMS: Draw Length: To change the draw length in 1" increments the module must be changed. See your PSE Dealer for information on how to obtain a replacement module. [. . . ] Evidence of abuse, mishandling, misuse, or alteration to any PSE product voids any claim to warranty. PSE cannot be held responsible for injury or product failure resulting from improper use or neglect of maintenance. All bows must undergo string and cable changes every 5, 000 shots or every 12 months to maintain PSE warranty coverage. Total arrow weight must be in accordance with the recommendations made by the Archery Trade Association (ATA) for minimum arrow weight/bow peak weight. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PSE ARCHERY COMPOUND BOW




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PSE ARCHERY COMPOUND BOW will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.