User manual RAYMARINE A57D

[. . . ] A-Series Multi-function display User reference manual A50, A50D, A57D, A70 and A70D models Trademarks and registered trademarks Autohelm, HSB, RayTech Navigator, Sail Pilot, SeaTalk and Sportpilot are UK registered trademarks of Raymarine UK Limited. Pathfinder and Raymarine are UK registered trademarks of Raymarine Holdings Limited. 45STV, 60STV, AST, Autoadapt, Auto GST, AutoSeastate, AutoTrim, Bidata, G-Series, HDFI, LifeTag, Marine Intelligence, Maxiview, On Board, Raychart, Raynav, Raypilot, RayTalk, Raystar, ST40, ST60+, Seaclutter, Smart Route, Tridata and Waypoint Navigation are trademarks of Raymarine UK Limited. All other product names are trademarks or registered trademarks of their respective owners. [. . . ] · · Rotate softkey rotates the view between 0° and 359°. Pitch softkey adjusts the vertical angle of view between 1° and 90°. Chapter 5: 3D chart application 65 Active action mode Provided that your system has a valid fix, this is the default mode when you first open the 3D chart application. The screen shows an aerial view of the 3D chart as if you are above your boat, slightly behind it and looking forward (eye point). As the boat moves forward the chart automatically updates and reveals the changing view ahead. In active motion mode you can adjust the pitch of the view, but rotating or panning the chart will change into planning mode. Changing the view There are four view options to choose from: forward, aft, port and starboard. 2. 431nm PRT ROTATE 106oT 2. 431nm STB ROTATE 280oT PRT AFT AFT STB 2. 431nm FWD ROTATE 195oT 2. 431nm AFT ROTATE 011oT FWD AFT The current option is highlighted on the toolbar and displayed in the status bar. 66 A-Series display - User reference manual D8725_1 Forward Default view. Pressing FIND SHIP resets to this view. Aft Eye point above and in front of the boat, looking behind it. D8726_1 Port Eye point above and to starboard side of boat, looking to port. Starboard Eye point above and to port side of boat, looking to starboard. To select the view option 1. Press OK. Making the view clearer If required, the 3D chart view can be made clearer using the following features: · · Exaggeration. Declutter. Press CANCEL at any time to return to the previous exaggeration setting. Declutter In some circumstances, the quantity of information displayed on the chart can render its interpretation difficult. The declutter feature removes some chart objects from view to make the chart clearer to read and navigation simpler. Exaggeration Sometimes it is easier to see certain topographical features if they are exaggerated. Adjusting the exaggeration has the effect of vertically stretching objects on the chart, making it easier to see their shape and position. Declutter OFF Declutter ON To turn declutter on or off 1. Toggle to ON or OFF using the DECLUTTER softkey. Exaggeration factor x1 Exaggeration factor x50 D8253_2 Chapter 5: 3D chart application D8254_1 67 5. 3 Using the standard and 3D charts together If the area in which you are navigating is unfamiliar, or visibility is poor, working with standard and 3D chart windows side-by-side can give you extra confidence and information. With the charts displayed side by side, a comprehensive view of the surrounding area is available. 3D view locator The view locator is a polygon displayed on the standard chart which outlines the boundaries of the area shown on the 3D chart. It is shown as a blue line extending from the virtual eye point icon. View locator Eye point icon D8255_1 As with all multiple page sets, the active window is indicated by a red border. For information about setting up a page set to view two applications together, see Split screen pages on page 26. As you rotate, adjust pitch, pan or zoom the 3D chart view, the locator updates on the standard chart. Press OK. 68 A-Series display - User reference manual Chart synchronization Chart synchronization enables you to synchronize heading, range and position information on the 2D and 3D charts. When chart synchronization is ON: · · 2D/3D synchronization is flagged in the status bars. Pressing FIND SHIP from any synchronized application returns the 3D chart to the default view and synchronizes the 2D chart to the same view. Changes made to heading, range or position in either 2D or 3D charts are reflected in both windows. If the 2D chart view for the current window is set to SYSTEM, any changes made in a chart window will be reflected in all windows on all displays. If the 2D chart view for the current window is set to LOCAL, no other windows will be affected. To synchronize the standard chart with the 3D chart 1. Press OK. · · · Chapter 5: 3D chart application D8257_1 69 5. 4 Aerial photography overlay You can overlay aerial photography onto the 3D image. Aerial photography is available for the navigable waters up to three miles inside the coastline. [. . . ] NAVIONICS'S CUMULATIVE LIABILITY TO YOU OR ANY OTHER PARTY FROM LOSS OR DAMAGES RESULTING FROM ANY CLAIMS, DEMANDS, OR ACTIONS ARISING OUT OF OR RELATING TO THIS AGREEMENTSHALL NOT EXCEED THE PURCHASE PRICE PAID FOR THE LICENSE TO USE THE DATA. IN NO EVENT SHALL NAVIONICS BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES OR LOST PROFITS, EVEN IF NAVIONICS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE FOREGOING LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. ACKNOWLEDGEMENT: You acknowledge that you have read this warranty provision, understand it, and agree to be bound by its terms and conditions. [. . . ]