User manual RCA 27F500TDV

[. . . ] Again. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. Note: This DVD player is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc does not correspond to the Region number of this DVD player, this DVD player cannot play the disc. [. . . ] " " will appear on the screen temporarily. To rewind the tape or forward it rapidly Stop the playback or recording by pressing STOP. To forward the tape: Press F. FWD. To stop the tape-winding, press STOP. To switch to playback directly (without STOP), press PLAY. Forward/Reverse picture search mode When the tape is being winded, you can switch to picture search mode (see next page). The unit will resume the tape winding as soon as the button is released. NOTES: This unit selects the playback tape speed SP, LP or SLP automatically. If you play a prerecorded tape after the DVD playback, you must set the unit to TV/VCR mode using TV/VCR. When you select the TV/VCR mode during DVD playback, DVD playback will change to the still mode, and after 5 minutes it will change to the stop mode automatically. 32 Special playback Picture Search Reverse picture search function Press REW x 1 or x 2 during the playback. Forward picture search function Press F. FWD x 1 or x 2 during the playback. To return to playback: Press PLAY. Repeat playback The entire video tape will be played until its end. The tape will then automatically rewind to the beginning and the playback will be repeated. SPEED SEARCH TIMES TAPE SPEED SP (Standard Play) LP (Long Play) SLP (Super Long Play) PICTURE SEARCH SPEED PRESS ONCE PRESS TWICE 3X 7X 9X 5X 9X 15 X 1 Press TV MENU. If "ON" is selected, the playback will be repeated endlessly. or to select MENU TIMER REC SET TV SETUP CH SETUP AUTO REPEAT ON OFF SYSTEM SETUP //ENTER/MENU Still Picture Press PAUSE/STILL during playback. To resume normal playback: Press PLAY. 3 Press TV MENU until the menu screen is cleared. if you press DISPLAY/CALL, " the screen. Slow tracking and vertical lock adjustment If noise bars appear in the picture during slow motion, press the TRACKING + or to reduce the noise bars. If the still picture jitters excessively, press TRACKING + or to stabilize the still picture. 4 To start the playback, press PLAY. The playback will be repeated endlessly. To cancel repeat mode: Follow the above step 1, then press ENTER to select the OFF position. Press TV MENU to return to the TV. Frame by Frame picture Press PAUSE/STILL during playback. To return to playback: Press PLAY or PAUSE/STILL. To monitor a TV program Press TV MONITOR while in the playback mode. The video tape will continue to play while the picture switches to the TV channel selected on the unit. Press the button to return to the playback picture. Adjusting tracking condition Automatic tracking adjustment Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback. Manual tracking adjustment If automatic tracking cannot eliminate noises well during playback, press TRACKING +/ to eliminate the noises. Press it briefly for a fine adjustment, or press and hold for a coarse adjustment. NOTES: The audio output is muted during SPEED SEARCH, STILL, FRAME ADVANCE and SLOW MOTION. During picture search mode there will be noise bars which are caused by the system. [. . . ] 1minute and 48 seconds (with T-120 Cassette Tape) DVD section Signal system: Applicable disc: Frequency response: S/N Ratio: Harmonic distortion: Wow and flutter: Output: NTSC DVD (12cm, 8cm), CD (12cm, 8cm) DVD: 4Hz - 22KHz/CD: 4Hz - 20KHz 90dB 0. 06% Below Measurable Level Video : (RCA) 1 Vp-p/75 ohm Audio : (RCA) 12 dBm/1 K ohm Digital Audio : 0. 5Vp-p/75 ohm CD : Wavelength: 775 - 805 nm Maximum output power: 0. 5 mW DVD : Wavelength: 640 - 660 nm Maximum output power: 1. 0 mW Remote control x 1 Batteries (AAA) x 2 Pickup: ACCESSORIES: 61 Warranty RCA TruFlat TV/DVD/VCR Combination Limited Warranty What your warranty covers: Defects in material or workmanship. For how long after your purchase: One year from date of purchase for labor charges. Two years from date of purchase for picture tube. The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm whichever comes first. What we will do: Pay any Authorized RCA Television Service Center the labor charges to repair your unit. Pay any Authorized RCA Television Service Center for the new or, at our option, rebuilt replacement parts and picture tube required to repair your unit. How you get service: For 20" screen size: Take your unit to any Authorized RCA Television Service Center and pickup when repairs are complete. For screen sizes larger than 20": Request home or pick up, repair and return service from any Authorized RCA Television Service Center, provided that your unit is located within the geographic territory covered by an Authorized RCA Television Service Center. [. . . ]