User manual RCA CDRW120

[. . . ] Cover 1 9/24/02, 3:54 PM Important Information WARNING To reduce the risk of fire or electric shock, do not expose this product or AC charger to rain or moisture. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN To reduce the risk of electric shock, do not remove cover (or back). This symbol indicates important instructions accompanying the product. This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Refer to the identification/rating label located on the back panel of your product for its proper operating voltage. FCC Regulations state that unauthorized changes or modifications to this equipment may void the user's authority to operate it. Product Registration Please fill out the product registration card and return it immediately. [. . . ] (OK appears). Chapter 2 13 15920520. 02 Playing CDs 13 9/24/02, 3:55 PM Chapter 2: Playing CDs 4. · To program the next track, press TIME SET/PROGRAM again (or TIME SET/PROG on the remote control). Enter the second track using the number buttons on the remote or the SKIP/SEARCH arrow buttons on the front of the recorder. To select the second track, press TIME SET/PROGRAM (or TIME SET/PROG on the remote control) (OK appears). To review your programmed tracks, press and release the left SKIP/SEARCH arrow button repeatedly to scroll through the tracks (the tracks appear, with the last track you programmed showing first). To play your programmed tracks, press PLAY (the tracks play in the order you programmed them). disappears from the display. Note: Programmed tracks are cleared if either disc tray is opened. · · Repeat You can repeat a single track, an entire disc, just your programmed tracks, or both discs A and B. Press and release the REPEAT button repeatedly to scroll through the modes: REPEAT 1­ repeats the current track REPEAT ­ repeats the current disc or programmed tracks REPEAT ALL ­ repeats all discs or programmed tracks Random You can play your programmed tracks and both disc A and B in random order. To start random play, press the RANDOM button on the remote (RANDOM appears). To stop random play, press RANDOM again (RANDOM disappears). Note: If you open either disc tray, random play is stopped. 14 Chapter 2 15920520. 02 Playing CDs 14 9/24/02, 3:55 PM Chapter 3: Recording CDs Copying a CD You can use this feature to easily copy an entire CD. Press MAKE CD, then PLAY/PAUSE on side B of the unit (MAKE CD and REC appear). The disk will be automatically finalized when copying is done. To check the remaining recording time, press REMAIN. Checking Remaining Record and Play Time You can check the remaining record time left on a disc in tray B or check the remaining play time for both discs. Record Time Press the REMAIN button repeatedly to show the remaining record time (the display toggles through elapsed time, total record time of the disc, and total remaining time of the disc). Play Time Following the remaining record time displays for disc B, you'll see the remaining play time displays for disc A. Press the REMAIN button repeatedly to show the remaining play time (the display toggles through elapsed time, total play time of the disc, total remaining play time of the disc, and remaining time of the current track). Chapter 3 15 15920520. 03 Recording CDs 15 9/24/02, 3:55 PM Chapter 3: Recording CDs High-Speed Dubbing You can use the high-speed dubbing feature when copying a CD or programmed tracks from disc A in order to speed up the recording time. The quality of the recording is the same as when you record at normal speed. If you want to copy programmed tracks, make sure the tracks are programmed properly (see Programming Tracks, page 13). Press and release DUBB repeatedly until the desired setting is displayed, DUBB and 1X DISC (normal disc dubb), DUBB and 2X DISC (high-speed disc dubb), DUBB. 1 and 1X TRK (normal track dubb), or DUBB. 1 and 2X TRK (high-speed track dubb). Press PLAY/PAUSE on side B of the unit (BUSY appears, then DUBB and REC appear). 4. BUSY appears, followed by UPDATE when the unit is finished recording. · · · To check the remaining record time, press REMAIN. To return to normal speed dubbing, select 1X TRK or 1X DISC in step 3. To stop recording, press STOP. Finalizing Discs You need to finalize both CD-Rs and CD-RWs to make them readable on other players. Important: Once a CD-R has been finalized, you can't record anything else on it. A CD-RW can be erased and re-recorded once it has been finalized, but you must first unfinalize it. Also, once you start finalizing a disc, it can't be cancelled. 1. [. . . ] Never use strong cleaning agents, such as ammonia-based cleaners, or abrasive powder. This could increase the risk of fire or shock hazard or damage to the unit. 26 Chapter 4 15920520. 04 Additional 26 9/24/02, 3:55 PM Chapter 4: Additional Information Limited Warranty What your warranty covers: · Defects in materials or workmanship. For how long after your purchase: · · One year from date of purchase for labor and parts The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first. What we will do: · · Pay any Authorized RCA Audio Service Center the labor charges to repair your unit. Pay any Authorized RCA Audio Service Center for the new or, at our option, refurbished replacement parts required to repair your unit. How you get service: · Take your unit to any Authorized RCA Audio Service Center. To identify your nearest Authorized RCA Audio Service Center, ask your dealer, look in the Yellow Pages, or call 1-800-336-1900. [. . . ]