User manual RCA DRC245N

[. . . ] The Dolby* Digital Setup Menu Dolby Picture is distorted · The disc might be damaged. · When using FORWARD or REVERSE buttons, it is normal for some distortion while scanning. -- Dolby Digital Setup -Dynamic Full 3/4 1/2 1/4 OFF Dynamic This feature monitors the audio track and controls the different sound levels via dynamic compression. It minimizes sudden volume increases such as when a commercial starts. Select a range using the and buttons and press OK. Setup and Connections Install Batteries in the Remote Sound problems · · · · Adjust the volume control. [. . . ] This DVD player is designed and manufactured to respond to the Region Management Information. If the Region number of a DVD disc does not correspond to the Region number of this DVD player, this DVD player cannot play the disc. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. COAXIAL OPTICAL The remote control does not work · Remember to point the remote control at the front of your player (towards the infrared remote sensor). · Maybe the batteries in the remote are weak, dead, or installed incorrectly. Replace the batteries and make sure the polarity of the terminals (+ and -) is correct. · Operate the remote control at a distance of no more than 20 feet. Digital Out Digital Out Optical Cable Coaxial Cable DIGITAL OUT COAXIAL/OPTICAL (Audio) Use one of these jacks to connect your DVD player to a Dolby Digital receiver or decoder. Some receivers have either the COAXIAL or OPTICAL type of Digital Audio Input jack and some have both. Under most conditions, optical and coaxial connections work equally well­­the only difference is the type of cable you connect to the jack. Note: If the DVD player is connected to a DTS receiver through DIGITAL OUT and DTS track is selected, there will be no sound. Disc won't play · Insert a disc with the label side facing up. 1. Forgot password · Open the tray and press CLEAR, 0, 0, 0, 0, 1. Turn off DVD player and then turn it on by pressing the ON/OFF key, or you can unplug the unit, wait a few seconds and plug it in again. Lock/Unlock DVD player · To lock player, open tray and press SETUP, 0, 0, 0, 8, 3 (an on-screen message, "Key Lock On" is displayed). · To unlock, press SETUP, 0, 0, 0, 8, 3. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Play starts, but then stops immediately · The disc is dirty. Allow player to dry out. Picture format does not match the screen format. · The picture format is adjustable, refer to GENERAL SETUP menu section. Some discs dictate the format, in which case no adjustment is possible. 4 1 ©2005 Thomson, Inc Trademark(s) ®Registered, Marca(s) Registrada(s) Printed in China TOCOM 1650024B Front of the DVD Player (buttons appear left to right below) Playing Discs Compatible Discs DVD+Rewritable Program Playback (all discs except WMA and mp3) With this option you choose and program the playback order. Use the number buttons to enter the title and/or chapter number (for DVD) or track number (for VCD and Audio CD). Press the STOP button twice or the OPEN/CLOSE button to cancel program playback. Notes: The playback list remains until the disc is removed from the player. Press PROGRAM repeatedly to take you back to the beginning or toggle between the lists. Playback of mp3, WMA, or JPEG files Playing mp3, WMA, or JPEG files mp3 is an audio file format which compresses recorded music. It was developed by Fraunhofer Gesellschaft in collaboration with Thomson Inc. The main advantage of the mp3 format is the ability to store CD-quality music tracks on a personal computer in a user-friendly, compressed files. WMA (Windows Media Audio) is another audio file format, developed by Microsoft. [. . . ] To resume normal playback, press PLAY or continue to press FORWARD or REVERSE. Freeze Frame and Frame Advance ­ While a disc is playing, press PAUSE to freeze the picture. To resume normal playback, press PLAY. Note: After approximately one minute in PAUSE with no user interaction, the player goes into screen saver mode. Display The Display appears across the top of the screen when you press the DISPLAY button on the remote while playing a disc. Press the DISPLAY button repeatedly to scroll through playback information. Menu System The DVD Player Menu System The DVD player menu system is not the same as the disc menu. [. . . ]