User manual RCA DRC6350N

[. . . ] Again. Important Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts. This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The apparatus should not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION FCC Regulations state that unauthorized changes or modifications to this equipment may void the user's authority to operate it. Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Attention: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqú au fond. [. . . ] Press STOP to stop Index Search. Notes: Certain index marks may be missed by the VCR including: · · · Marks too close to the current location of the tape. Index marks that start at the beginning of the tape. 30 Chapter 4 VCR Features Explanation of the VCR Menu System The on-screen menus you set up the first time you turned on your DVD/VCR were explained in Chapter 1. This chapter lists other menus that you can access through the VCR Main Menu (press VCR and then MENU on the remote control). CLOCK PROGRAM TUNING SETUP SELECT ENTER TO EXIT PRESS MONTH : MARCH DAY : 30 WED YEAR : 2005 TIME : 12 : 00 AM AUTO CLOCK SET : ON DAYLIGHT SAVING: AUTO TIME ZONE: AUTO Clock Menu The CLOCK menu options were set the first time you turned on the DVD/VCR and are explained on page 11. SELECT ADJUST TO EXIT PRESS TO ERASE PRESS TO EXIT PRESS PROGRAM MONTH : DAY : START : STOP : CHANNEL : SPEED : REPEAT : 1 JULY 6 WED 6:00 PM 7:30 PM 4 TV SP ONCE Program Menu The PROGRAM menu options are explained in detail on page 27. Chapter 4 31 VCR Features Tuning Menu AUTO CHANNEL SET TUNING BAND: TV CH. 2 ADD SOURCE SELECT: TUNER The Auto Channel Search procedure is explained in detail on page 10. To add or delete channels from the VCR channel list: 1. Press the down arrow button until TUNING is highlighted, and press OK (the TUNING menu appears). ADD/DEL: is highlighted, and press the right arrow button until the channel you want to add or delete is shown. Press the OK button to add or delete the channel (it will be added or deleted). Repeat steps 3-4 for any additional channels you want to edit. SELECT ADJUST TO EXIT PRESS Setup Menu FUNCTION OSD : ON AUDIO MODE: HI-FI BROADCAST TYPE: STEREO AUDIO OUTPUT: STEREO Use the Setup menu to change any of the settings in the initial setup procedure, such as language. Press the VCR button on the remote, then press MENU to bring up the Main menu. Press the down arrow button to highlight SET UP and press OK (the SETUP menu appears. SELECT ADJUST TO EXIT PRESS Function OSD Function OSD allows you to turn on or off the on-screen displays. Use the right arrow button to choose the desired setting. Audio Mode AUDIO MODE lets you select what type of audio that is played during playback. Use the right arrow button to choose the desired setting. 32 Chapter 4 VCR Features Broadcast Type You can select the type of audio signal the DVD/VCR receives and records. SAP is used to record a Second Audio Program, such as a bilingual program. Audio Output You can set how the audio is output to your TV. STEREO is used for true separation of the sound to the left and right speakers. LEFT is used when you want to hear the left channel sound from both speakers. RIGHT is used when you want to hear the right channel sound from both speakers. VCR Output Channel Note: This is feature is not included in the VCR menu system. It is done from the front panel and is displayed on the front of the unit. Use this option to change the VCR's output channel. Press and hold the CHANNEL + or - button on the front of the unit for 5 seconds (RF3 appears on the front of the DVD/VCR). Press CHANNEL + or - again to change the output channel to 4 (RF4 appears). To save the change, press the POWER button on the front of the unit. Child Lock You can lock the buttons on the front of the DVD/VCR to prevent children from using them. To lock the buttons: Press the LOCK button on the remote (Lock appears on the front of the unit and flashes when a button on the front of the unit is pressed). Remember, the DVD/VCR can still be controlled by the remote, so put it in a safe place. [. . . ] Thomson accepts no liability in case of damage or loss en route to Thomson. A new or refurbished unit will be shipped to you freight prepaid. · Continued on next page Chapter 6 57 Additional Information What your warranty does not cover: · · · · · · · Acts of nature, such as but not limited to lightning damage. A unit that has been modified or incorporated into other products or is used for institutional or other commercial purposes. Shipping damage if the unit was not packed and shipped in the manner prescribed by Thomson. Product Registration: Please complete the online Product Registration on RCA. com/productregistration or complete and mail the Product Registration Card packed with your unit. [. . . ]