User manual RCA RCU600M

[. . . ] RCU600M_IB_resized. qxd 3/24/04 4:10 AM Page 1 UNIVERSAL Remote universal Consolidates up to 6 remotes Home TheatreTM Keys take full advantage of your Home Theatre equipment with Surround Sound Control Compatible with today's most popular brands. MultiBrand Use See back for most popular brands. RCU600M remote RCU600M_IB_resized. qxd 3/24/04 4:10 AM Page 2 Table of Contents Product Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Battery Information and Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Key Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Use the number keys on the remote to enter the first code listed for your brand. After you enter a valid threedigit code, the indicator light turns off. Note: If you enter an invalid code, the LED flashes rapidly for two seconds. If your CABLE box does not turn off, repeat steps 3-6 above, entering the next code for your brand. If none of the codes work or your brand is not listed, use one of the Code Search methods to program this remote. (See Code Search section on page 10). CABLE BOX CODE ON·OFF CODE INDICATOR LIGHT SEARCH CABLE (BLINK) (OFF) Program for AUDIO Systems-- Direct Entry Method This remote control will operate many features found in AUDIO systems. To program your remote to control your audio component, follow these steps: Note: CD systems need to be programmed using the DVD component key. Note: If your brand isn't listed, use one of the Code Search methods to program this remote control. Press and hold the CODE SEARCH key until the indicator light illuminates. Use the number keys on the remote to enter the first code listed for your brand. After you enter a valid threedigit code, the indicator light turns off. Note: If you enter an invalid code, the LED flashes rapidly for two seconds. Start over at step 3. (OFF) AUDIO (BLINK) CODE INDICATOR LIGHT SEARCH 8 RCU600M_IB_resized. qxd 3/24/04 4:10 AM Page 9 6. If your AUDIO component does not turn off, repeat steps 3-6 above, entering the next code for your brand. If none of the codes work or your brand is not listed, use one of the Code Search methods to program this remote. (See Code Search section on page 10). ON·OFF VOL+ AUDIO SYSTEM CODE Operating AUDIO System Functions The following is a list of instructions for operating Audio functions. Experiment with your AUDIO system to determine which functions work with your components. TURNING ON THE RECEIVER OR MINI-SYSTEM Point the remote control at the receiver and press the AUDIO key and then the ON·OFF key to turn the system on. SELECTING A COMPONENT INPUT Component inputs such as a DVD player or VCR may be selected depending on the features of your receiver or mini-system. Input selection may be made either by pressing the labeled number key or pressing the FUNCTION key to toggle through the inputs available on your system. Note: You may need to experiment with your system since manufacturers' products do not all work in the same manner. USING THE NUMBER KEYS TO CHANGE AUDIO INPUTS To select a component, press the number key (1-6) that corresponds with the component you want to operate (CD, TAPE, TUNER, TV, VIDEO 1, or VIDEO 2). [. . . ] · If you are trying to turn on an RCA, GE or PROSCAN component, press the component key (TV, VCR, DVD, DBS·SAT, CABLE, AUDIO) instead of the ON·OFF key. · If operating a VCR to record, you must press the RECORD key twice. · If you're trying to change channels, try pressing the ENTER key after entering the channel number as this is a requirement of certain models and brands. · There is a possibility that a programmed code may only be able to control some of your component features (e. g. , only turns a component on and off). [. . . ]