User manual RCA RCU600WMS

[. . . ] RCU600WMS_IB. qxd 6/5/03 16:55 Page 1 UNIVERSAL Remote universal Consolidates up to 6 remotes Home TheatreTM Keys take full advantage of your Home Theatre equipment with Surround Sound Control Compatible with today's most popular brands. MultiBrand Use See back for most popular brands. RCU600 remote RCU600WMS_IB. qxd 6/5/03 16:55 Page 2 Table of Contents Product Diagram . 15 Indicator Light CHAN and VOL Component Keys (TV, VCR, DVD, DBS·SAT, CABLE, AUDIO) keys have dual functions. They act as navigation keys (up, down, left, right) in menu systems. Dedicated MENU key for DVD disc menus, some TVs and satellite receivers. SELECT key chooses highlighted choice. ENTER key Use with Manual or Auto Code Search to accept code. BACKLIGHT key Actual model may vary from picture shown. 2 RCU600WMS_IB. qxd 6/5/03 16:55 Page 3 6 Component Universal Remote Congratulations on your purchase of the six-component universal remote by RCA. This universal remote controls up to six electronic components and makes juggling remote controls a thing of the past. [. . . ] Note: If you enter an invalid code, the LED flashes rapidly for two seconds. Start over at step 3. (OFF) CODE INDICATOR LIGHT SEARCH AUDIO (BLINK) 8 RCU600WMS_IB. qxd 6/5/03 16:55 Page 9 6. If your AUDIO component does not turn off, repeat steps 3-6 above, entering the next code for your brand. If none of the codes work or your brand is not listed, use one of the Code Search methods to program this remote. (See Code Search section on page 10). ON·OFF VOL+ AUDIO SYSTEM CODE Operating AUDIO System Functions The following is a list of instructions for operating Audio functions. Experiment with your AUDIO system to determine which functions work with your components. TURNING ON THE RECEIVER OR MINI-SYSTEM Point the remote control at the receiver and press the AUDIO key and then the ON·OFF key to turn the system on. SELECTING A COMPONENT INPUT Component inputs such as a DVD player or VCR may be selected depending on the features of your receiver or mini-system. Input selection may be made either by pressing the labeled number key or pressing the FUNCTION key to toggle through the inputs available on your system. Note: You may need to experiment with your system since manufacturers' products do not all work in the same manner. USING THE NUMBER KEYS TO CHANGE AUDIO INPUTS To select a component, press the number key (1-6) that corresponds with the component you want to operate (CD, TAPE, TUNER, TV, VIDEO 1, or VIDEO 2). USING THE FUNCTION KEY TO CHANGE AUDIO INPUTS To select a component, press the FUNCTION key until the input you want to operate appears on your system. Press the AUDIO key and then the ON·OFF key to turn the system on. Press the AUDIO key and then the ON·OFF key to turn the system on. Select the AUDIO input either by using the labeled number keys or the FUNCTION key. Press the VOL+ or VOL- keys to control volume. Note: The VOLUME keys may operate both TV and receiver volume at the same time. If this presents a problem, it may be resolved by entering the TV menu and disabling the TV speakers. CONTROLLING THE SURROUND SOUND FEATURE Press the DELAY+ or DELAY- key to achieve the desired delay effect. Press the DSP ON·OFF key to turn DSP (Digital Signal Processing) on or off. Press the LEVEL+ or LEVEL- keys to adjust the speaker levels. 9 RCU600WMS_IB. qxd 6/5/03 16:55 Page 10 Code Search Methods If your component's brand is not listed in the Code List or you have tried all the codes for your brand and the remote does not operate your component, use one of the Code Search methods below-- Manual Code Search or Auto Code Search. Both Code Search methods search all of the codes since your component's code may be listed under another brand in the Code List. Note: The Code Search method may take a long time because the remote searches all of the codes in its memory for the code that operates your component. [. . . ] · If you are trying to turn on an RCA, GE or PROSCAN component, press the component key (TV, VCR, DVD, DBS·SAT, CABLE, AUDIO) instead of the ON·OFF key. · If operating a VCR to record, you must press the RECORD key twice. · If you're trying to change channels, try pressing the ENTER key after entering the channel number as this is a requirement of certain models and brands. · There is a possibility that a programmed code may only be able to control some of your component features (e. g. , only turns a component on and off). [. . . ]