User manual REVEL RIB 6C INSTALLATION
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual REVEL RIB 6C. We hope that this REVEL RIB 6C user guide will be useful to you.
Manual abstract: user guide REVEL RIB 6CINSTALLATION
Detailed instructions for use are in the User's Guide.
[. . . ] [. . . ] Use the wing edge with the two larger holes.
WIRE TABS Step 2: Position the Rough-In Bracket/Wing assembly between the wall studs so that the bracket is in the correct position for the final speaker placement. Nail the assembly into place, making sure that the nail heads are as flush against the wings as possible. Note: Make sure that the wire tabs on the assembly are in the back, so they are on the inside of the wall.
Step 3: Use the wire tabs to hold pre-routed speaker wires in place. Ensure that no wire remains exposed on the front (wall board) side of the assembly.
WIRE TABS
Step 4: After the wall board is installed, cut out the hole for the speaker using the inside cut-out of the frame as a guide. [. . . ] [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE REVEL RIB 6C
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual REVEL RIB 6C will begin.