User manual ROLAND VS-880EX MANUAL 2

[. . . ] In the case of the symbol at left, it means that the unit must never be disassembled. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the power-cord plug must be unplugged from the outlet. Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly. Used for instructions intended to alert the user to the risk of injury or material damage should the unit be used improperly. [. . . ] Marker view · Number on the left: the number of the marker that was passed at the point displayed on the time counter · Number on the right: the number of markers contained in the file 4. File length: · while recording, this displays the remaining recording time 5. Time counter · During playback and while paused: · During recording: displays elapsed time since the beginning of the file displays elapsed recording time Basic operation fig. recorder03. eps 1. [A<>B] (repeat A-B) button Play back the section between two points (A-B) in the file repeatedly. Set the A and B marks during playback to repeat the section between A and B. [MARKER] button Insert a marker at the point displayed on the time counter. Reset the time counter to zero If markers have been inserted, pressing this button will reset the time counter to the point of the previous marker. Move the time counter to the end of the file If markers have been inserted, pressing this button will move the time counter to the point of the next marker. Create a new file and start recording 27 Using the WAVE recorder SD memory card In SONAR V-STUDIO 100, data is recorded on an SD memory card. Inserting an SD memory card fig. sd-ins. eps NEVER insert or remove an SD memory card when the power of SONAR V-STUDIO 100 is on. Doing so may result in the loss of data from the SONAR V-STUDIO 100 or the SD memory card. 1. Insert the SD card into the SD card slot. · Never insert or remove an SD memory card while this unit's power is on. After inserting marks A and B while the file is playing you can then repeat the section between the two marks. fig. repeat-a. eps 1. Play back the file. Press the [A <> B] button once during playback. * After inserting the A mark, pressing the B mark cancels the A mark. fig. repeat-b. eps A (Stop) button before setting the 2. Press the [A <> B] button again. The [A <> B] button lights up. The section set in the steps 1 and 2 automatically plays back repeatedly. fig. repeat-ab. eps A B * After inserting the A mark, if you play back to the end of the file without setting the B mark, the end of file becomes the B mark. A B Canceling the loop playback To cancel the loop playback after inserting A and B marks, press the [A <> B] button. The [A <> B] button turns off and the loop playback is cancelled. 33 Using the WAVE recorder Using the metronome 1. Press the [METRONOME] button. The metronome function is turned on and the [METRONOME] button flashes. 2. The metronome setting screen is displayed. Use the [CURSOR/VALUE] knob to adjust the tempo, beat, and volume of the metronome. fig. metronome01. eps Parameter Tempo Beat Level Description Tempo (BPM) Beat Volume (0-127) 3. To turn off the metronome, press the [METRONOME] button again. The light of the [METRONOME] button turns off. 34 Using the WAVE recorder Recording while playing back a file You can play back a file in the background and record only your playing at the same time. 1. Press and hold the [SHIFT] button, and press the [CURSOR/VALUE] knob. The main screen displays "BG" to the right of the file name. This indicates that the file is selected for background playback. fig. bgMark. eps 3. [. . . ] Houtstraat 3, B-2260, Oevel (Westerlo) BELGIUM TEL: (014) 575811 PORTUGAL Roland Iberia, S. L. Portugal Office Cais das Pedras, 8/9-1 Dto 4050-465, Porto, PORTUGAL TEL: 22 608 00 60 U. S. A. Cakewalk, Inc. 268 Summer Street Boston, MA 02210 U. SA (617) 423-9004 http://www. cakewalk. com/ NORTH AMERICA CANADA Roland Canada Ltd. (Toronto Office) 170 Admiral Boulevard Mississauga On L5T 2N6 CANADA TEL: (905) 362 9707 Roland Shanghai Electronics Co. , Ltd. [. . . ]