User manual ROLLS MX152

[. . . ] SCHEMATIC MX152 MixMate Mic/Line Mixer Input Impedance: Mic: Source: Max Input Level: Mic: Source: Connectors: Phantom Power: Max Gain: Mic: Source: Tone Controls: Noise Floor: S/N Ratio: Priority Attenuation: Power: Size: Weight: SPECIFICATIONS ROLLS CORPORATION SALT LAKE CITY, UTAH 6/04 600 Ohms XLR balanced 22K Ohms RCA -14 dBV Mic level Max 24 dBV 2: XLR, 8: Stereo RCA +12 VDC 60 dBV 26 dBV +/-12 dB 100 Hz Bass +/-12 dB 11kHz Treble - 80 dB 96 dB 60 dB 12VAC / 600 mA 5. 4" x 1. 7" x 5. 5" 2 lbs Owners Manual INTRODUCTION Thank your for your purchase of the Rolls MX152 MixMate. The MX152 is a two microphone, three source stereo mixer designed for restaurants, schools, churches, clubs etc. [. . . ] If a paging microphone is being used, connect it to Mic Input 1 so it may be used with the Talk Over function. Connect source signals such as CD players, cassette players or video players to the RCA Source Inputs. If a jukebox is being connected, and you want its signal to mute the other source signals, connect it to Source input 3. Output Connect a stereo RCA cabe to the main Output jack, and to an amplifier or the next device in your signal chain. Shown here is a connection example for the MX152. DESCRIPTION FRONT PANEL Mic 1, 2 Adjust the level of signal from the corresponding Mic Input. 2: TONE 1, 2 Adjusts the frequency content of the microphone signal in the channel. When 2: the control is turned counter-clockwise, the high frequencies are cut, when the control is turned clockwise, the low frequencies are cut. Treble: Adjusts the high frequencies of the Source 1 and 2 signals only. pwr: pwr LED indicating power is applied to the MX152 and the unit is on. OPERATION DIP SWITCH SETTINGS (From left to right) · The Mono/Stereo switch selects the output mode. When the switch is down, the stereo signals are mixed to mono and sent to both the Right and Left Main output jacks. · Source 3 Priority: when in the down position, Source 1, and 2 will be "ducked" or muted by the signals at Source 3. With a jukebox connected to Source input 3, and the Talkover switch 2 on (down), the other Source input signals such as background music, will be muted and only the jukebox will be heard. [. . . ] DIP SWITCH: Contains the small switches for engaging Mic 1, 2 phantom power, Source 3 Stereo or Mono, the priority (Talk Over) functions, and the Mono/Stereo select. MICROPHONE ONE and TWO: Balanced XLR inputs to be connected to dynamic or condenser microphones. [. . . ]