User manual ROLLS MX34

[. . . ] In the absence of such purchase receipt, the warranty period shall be one (1) year from the date of manufacture. This warranty shall be invalid if the product is damaged as a result of defacement, misuse, abuse, neglect, accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our own service facility or an authorized Service Center, or any use violative of instructions furnished by us. This one-year warranty is in lieu of all expressed warranties, obligations or liabilities. [. . . ] Unpack and Inspect the MX34 package Your MX34 was carefully packed at the factory in a protective carton. Nonetheless, be sure to examine the unit and the carton for any signs of damage that may have occurred during shipping. If obvious physical damage is noticed, contact the carrier immediately to make a damage claim. We suggest saving the shipping carton and packing materials for safely transporting the unit in the future. Please visit our website at www. rolls. com, click on the Register Your Warranty Here text and follow the instructions to register your MX34. TABLE OF CONTENTS INTRODUCTION INSPECTION TABLE OF CONTENTS DESCRIPTION Front Panel Rear Panel Battery Installation Phantom Power 1 1 1 2 Size: Weight: CONNECTION 3 A note on wiring a mono signal to the stereo AUX IN OPERATION SCHEMATIC SPECIFICATIONS WARRANTY 4 5 6 BACK COVER 1 6 SCHEMATIC FRONT PANEL DESCRIPTION LIVEMIX MX34 0 LEVEL 10 L pan R 0 LEVEL 10 L pan R pwr 0 LEVEL 10 OUTPUT MIC 1 MIC 2 HEADPHONE MIC1 and MIC2 LEVEL: Adjusts the amount of signal of the indicated Microphone channel. PAN: Adjusts the relative level of signal from the channel to the Right/Left Output. HEADPHONE LEVEL: Adjusts the amount of signal from the Headphone Output. OUTPUT: 1/8î (3. 5mm) jack containing the Headphone Output signal. REAR PANEL INPUTS 12 VDC PWR + STEREO - OUT AUX IN CHANNEL 2 CHANNEL 1 INPUTS: 1 - 2: XLR balanced inputs for connection to any standard dynamic or condenser microphone. The input circuitry has a very wide input range and can accomodate almost any (mic to line) level signal. AUX IN: Tip-Ring-Sleeve stereo 1/8î (3. 5mm) jack for connecting to another line-level stereo signal source. STEREO OUT: Tip-Ring-Sleeve stereo 1/8î (3. 5mm) jack for connection to a camera or other stereo input (Line-level only). BATTERY INSTALLATION: To replace the 9 V alkaline batteries, first carefully press in and up on the door to release the battery compartment. [. . . ] Adjust the Headphone Level control for a comfortable listening volume. For best results, we recommend recording a couple of test runs to ensure you have proper levels set. When the signal becomes weak and distorted, and the pwr LED dims, the batteries will need replacing. Connect STEREO headphones or earphones to the 1/8î (3. 5mm) HEADPHONE OUTPUT located on the MX34 front panel. NOTE: ON CONNECTING A WIRELESS MIC TO THE AUX INPUT DO NOT CONNECT A MONO PLUG TO TIP RING SLEEVE MONO PLUG THE AUX IN OR STEREO OUTPUT. [. . . ]