User manual ROLLS RM68

[. . . ] LIMITED WARRANTY This product is warranted to the original consumer purchaser to be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase as shown on the purchaser's receipt. The obligation of Rolls Corporation under this warranty shall be limited to repair or replacement (at our option), during the warranty period of any part which proves defective in material or workmanship under normal installation, use and service, provided the product is returned to Rolls Corporation, TRANSPORTATION CHARGES PREPAID. Products returned to us or to an authorized Service Center must be accompanied by a copy of the purchase receipt. [. . . ] Microphone and Source inputs 1 through 3 share Volume sliders 1 through 3. Microphone One features a talkover function, activated automatically when signal is present at Mic One and the Talkover switch is engaged. +12 VDC phantom power is available for each individual microphone input. Bass, Treble and overall Volume controls are provided for each zone output. Applications for the Zone Wolf include restaurants, hotels, schools, churches or factories. FEATURES: - Two separate zones with six assignable inputs - Three XLR balanced Mic inputs with phantom power - Six stereo RCA inputs - Bass and Treble controls for each zone - Automatic talkover on Mic One to the assigned zone - Master level for each zone - 1/4" stereo outputs - Rugged design and steel chassis for demanding road use, or installation INSPECTION 1. If obvious physical damage is noticed, contact the carrier immediately to make a damage claim. We suggest saving the shipping carton and packing materials for safely transporting the unit in the future. Please complete the Warranty Registration Card and return it to the factory. DESCRIPTION FRONT PANEL VOLUME 1 10 ZONE 1 BOTH 2 VOLUME 2 10 ZONE 1 BOTH 2 VOLUME 3 10 ZONE 1 BOTH 2 VOLUME 4 10 ZONE 1 BOTH 2 VOLUME 5 10 ZONE 1 BOTH 2 VOLUME 6 10 ZONE 1 BOTH 2 ZONE 2 0 0 ZONE 1 0 0 PWR 0 10 VOLUME -12 +12 BASS -12 +12 TREBLE 0 10 VOLUME -12 +12 BASS -12 +12 TREBLE REAR PANEL SERIAL NUMBER 68MADE IN U. S. A TALK OVER ON OFF SOURCE INPUTS RISQUE DE CHOC - NE PAS ENLEVER ZONE 1 OUT LEFT RIGHT ZONE 2 OUT LEFT RIGHT BUS INPUTS ZONE 1 ZONE 2 6 L 5 L 4 L 3 L 2 L 1 L PHANTOM POWER 3 2 1 MIC 3 MIC 2 MIC 1 MODEL RM68 R R R R R R 120 VAC 50/60 Hz 15 VA NRTL/C WARNING: To reduce the risk of electric shock or fire, do not expose this device to rain or moisture. CAUTION: To reduce the risk of electric shock do not remove lid. Refer servicing to qualified service personnel. Mic 1 - 3: Balanced XLR inputs for connection to dynamic or condenser microphones. From the factory, the jumpers are set vertically, not connecting the phantom power. To connect phantom power to the indicated mic channel, carefully pull the jumper off the pins and reconnect the two adjacent pins by installing the jumper horizontally. Channels 1 - 3 share busses and volume controls with Mic inputs 1 - 3. [. . . ] VOLUME: Adjusts the output level of the zone from -infinity (off) to a maximum of +26 dB of gain. BASS: Controls the amount of the low-frequency content of the zone signal. TREBLE: Controls the amount of the high-frequency content of the zone signal. [. . . ]