User manual ROLLS SE162

[. . . ] / EXCITER DEFINITION PWR INPUT SE162 LIMITED WARRANTY This product is warranted to the original consumer purchaser to be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase as shown on the purchaser's receipt. The obligation of Rolls Corporation under this warranty shall be limited to repair or replacement (at our option), during the warranty period of any part which proves defective in material or workmanship under normal installation, use and service, provided the product is returned to Rolls Corporation, TRANSPORTATION CHARGES PREPAID. Products returned to us or to an authorized Service Center must be accompanied by a copy of the purchase receipt. [. . . ] It was designed by sound engineers who desired a way to take signals that may need some frequency loss compensation, and send the purified signals down long lines. Rolls Corporation Salt Lake City, UT 2/98 ACTIVE OWNERS MANUAL SE162 RED SQUARE D. I. / Sonic Exciter RED SQUARE OUTPUT INPUT BOTTOM Thank you for your purchase of the Rolls SE162 DI/Sonic Exciter. We take pride in our products and appreciate any comments you may have regarding them. The SE162 takes your program material and adds new life, clarity, and three dimensionality to your sounds, as well as converting a high impedance signal to low impedance. Please read the following manual carefully to ensure proper operation, and enjoy your new SE162. Unpack and Inspect the SE162 package Your SE162 was carefully packed at the factory in a protective carton. Nonetheless, be sure to examine the unit and the carton for any signs of damage that may have occurred during shipping. If obvious physical damage is noticed, contact the carrier immediately to make a damage claim. We suggest saving the shipping carton and packing materials for safely transporting the unit in the future. Please complete the Warranty Registration Card and return it to the factory. BOTTOM: Controls the low frequency cut/boost (flat or no cut/boost is at about 11'clock). There is a 0 to 1/2 turn spectrum spread from mid-range to bass with this control as well as amplitude control. Setting it on 0 is flat response and minimal spread, on 10 is maximum spread and definition. PWR LED: Indicates that the RP262 is connected to an AC outlet, and the power is turned on. INPUT OUTPUT 12 - 16 VDC INPUT: Unbalanced 1/4" T-S input for connection to the output of an instrument preamplifier or other line level output. [. . . ] What this means to you is the elements of your sound are fanned out like a deck of cards, making each sound more audible and distinct, reducing the need for high volume and radical equalizer adjustment. SPECIFICATIONS Frequency Response Input Impedance THD + Noise Noise Floor Indicators Input/Output jacks Size: Weight: Power: 20 Hz - 40 kHz 100K unbalanced <0. 03% typical -78 dB Power LED Active LED XLR balanced output 1/4" unbalanced input and output 4" x 4" x 1. 5" 1 lb. (. 5 kg) 12 - 16 VDC 50mA 5 x 1. 2 mm DC Jack - Center Negative RED SQUARE SE162 ACTIVE INPUT D. I. [. . . ]