User manual SCHOLTES CI 96I.T I S

[. . . ] IT Descrizione dell’apparecchio GB Description of the appliance Control panel The control panel described in this manual is only a representative example: it may not exactly match the panelon your appliance. 1 INCREASE POWER button switches on the hotplate and controls the power (see Start-up and use). 2 REDUCE POWER button controls the power and switches off the hotplate (see Start-up and use). 4 POWER indicator provides a visual display for the current heat level. [. . . ] it may be activated by pressing the b ooster o ost er oster button. This function boosts the power to 2000 W or 3000 W, depending on the size of the corresponding cooking zone. While the booster for one of the cooking zones is active, the corresponding front or rear cooking zone will operate at a reduced power level (e. If the booster for the rear left-hand hotplate has been activated, the power level of the front left-hand hotplate will be reduced). For further information, please refer to the Technical description of the models. Switching off the cooking zones To switch off a cooking zone: • Press the - button: the power of the cooking zone will progressively decrease until it is switched off. € Alternatively, the - + and buttons may be pressed Switching on the hob To switch the hob on, press and hold the approximately one second. Button for simultaneously: this immediately returns the power setting to 0 and the cooking zone switches off. If the and buttons are pressed for an extended period of time, the timer scrolls quickly through the minute values in the corresponding direction. All the cooking zones may be programmed simultaneously, for a duration between 1 and 99 minutes. The indicator light corresponding to the selected zone will start flashing. - + and Control panel lock When the hob is switched on, it is possible to lock the oven controls in order to avoid accidental changes being made to the settings (by children, during cleaning, etc. Press the button to lock the control panel: the indicator light above the button will switch on. Press the button for a few moments, the indicator light will switch off and the lock function will be removed. A buzzer sounds for approximately 1 minute and the cooking zone switches off when the set programme has finished. Using multiple programmes and the display If one or more hotplates are programmed, the display will show the data for the hotplate with the least time remaining, and the light corresponding to the position of the hotplate will flash. The lights corresponding to the other hotplates programmed will be switched on. To visualise the time remaining for the other programmed hotplates, press the button repeatedly: the time remaining for each hotplate will be shown sequentially in a clockwise order, starting from the front left hotplate. Use the button repeatedly until the duration you buttons to set the new duration. Switching off the hob Press the button to switch off the appliance - do not rely solely on the pan sensor. If the control panel lock has been activated, the controls will continue to be locked even after the hob is switched on again. In order to switch the hob on again, you must first remove the lock function. [. . . ] COLLO luneta HOB BRITE Hob Clean SWISSCLEANER 35 GB Automatic cleaning using the PYROLYTIC cycle During the PYROLYTIC cycle, the internal temperature of the oven reaches 500°C. The pyrolytic cycle is activated and burns away food and grime residues. Keep children away from the appliance during the automatic cleaning cycle as surfaces may become very hot. Particles may ignite inside the oven as a result of the combustion process. [. . . ]