Detailed instructions for use are in the User's Guide.
[. . . ] SCHG 640 GH SCHG 751 GH
Français
Mode d’emploi
TABLE DE CUISSON Sommaire
Mode d’emploi, 1 Avertissements, 3 Assistance, 6 Description de l’appareil, 8 Installation, 24 Mise en marche et utilisation, 29 Précautions et conseils, 29 Nettoyage et entretien, 30 Anomalies et remèdes, 31
Italiano
Español
Istruzioni per l’uso
PIANO Sommario
Istruzioni per l’uso, 1 Avvertenze, 2 Assistenza, 5 Descrizione dell’apparecchio, 7 Installazione, 10 Avvio e utilizzo, 14 Precauzioni e consigli, 15 Manutenzione e cura, 15 Anomalie e rimedi, 16
Manual de instrucciones
ENCIMERA Sumario
Manual de instrucciones, 1 Advertencias, 3 Asistencia, 6 Descripción del aparato, 8 Instalación, 32 Puesta en funcionamiento y uso, 36 Precauciones y consejos, 36 Mantenimiento y cuidados, 37 Anomalías y soluciones, 38
English
Portuges
Operating Instructions
HOB Contents
Operating Instructions, 1 Warnings, 2 Assistance, 5 Description of the appliance, 7 Installation, 17 Start-up and use, 21 Precautions and tips, 22 Maintenance and care, 22 Troubleshooting, 23
Instruções para a utilização
PLANO Índice
Instruções para a utilização, 1 Advertências, 4 Assistência, 6 Descrição do aparelho, 9 Instalação, 39 Início e utilização, 43 Precauções e conselhos, 43 Manutenção e cuidados, 44 Anomalias e soluções, 45
Avvertenze
ATTENZIONE: Questo apparecchio e le sue parti accessibili diventano molto caldi durante l’uso. ATTENZIONE: In caso di danneggiamento del piano in vetro: - spegnere immediatamente tutti i bruciatori ed eventuali elementi riscaldanti elettrici e scollegare l’apparecchio dalla rete elettrica - non toccare la superficie dell’apparecchio
Warnings
WARNING: The appliance and its accessible parts become hot during use. Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. [. . . ] Only use pipes and seals that comply with current national regulations. When the installation process is complete, check the pipe fittings for leaks using a soapy solution. Adapting to different types of gas To adapt the hob to a different type of gas other than default type (indicated on the rating plate at the base of the hob or on the packaging), the burner nozzles should be replaced as follows: 1. Unscrew the nozzles using a 7 mm socket spanner, and replace them with nozzles for the new type of gas (see table 1 “Burner and nozzle characteristics”). In the case of the Mini WOK*, use a spanner with a 7 mm opening to unscrew the nozzle (see figure). The hob can only be installed above built-in ovens with a cooling ventilation system. Electrical connection
Hobs equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate (this is located on the lower part of the appliance). If the appliance is to be installed above a built-in electric oven, the electrical connection of the hob and the oven must be carried out separately, both for electrical safety purposes and to make extracting the oven easier. Connecting the supply cable to the mains Install a standardised plug corresponding to the load indicated on the data plate. The appliance must be directly connected to the mains using an omnipolar circuit-breaker with a minimum contact opening of 3 mm installed between the appliance and the mains. The circuit-breaker must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the circuit-breaker). The supply cable must not come into contact with surfaces with temperatures higher than 50°C. The installer must ensure that the correct electrical connection has been made and that it is compliant with safety regulations. Before connecting to the power supply, make sure that: • The appliance is earthed and the plug is compliant with the law. The socket can withstand the maximum power of the appliance, which is indicated on the data plate. The voltage is in the range between the values indicated on the data plate. If the socket is incompatible with the plug, ask an authorised technician to replace it. Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. Once this procedure is finished, replace the old rating sticker with one indicating the new type of gas used. Should the gas pressure used be different (or vary slightly) from the recommended pressure, a suitable pressure regulator must be fitted to the inlet pipe (in order to comply with current national regulations). The position of the corresponding gas burner or electric hotplate* is shown on every knob. Gas burners Each burner can be adjusted to one of the following settings using the corresponding control knob: ● Off Maximum Minimum To turn on one of the burners, place a lighted match or lighter near the burner, press the knob all the way in and turn it anti-clockwise to the “High” setting. [. . . ] The appliance should not be operated by people (including children) with reduced physical, sensory or mental capacities, by inexperienced individuals or by anyone who is not familiar with the product. These individuals should, at the very least, be supervised by someone who assumes responsibility for their safety or receive preliminary instructions relating to the operation of the appliance. The appliance is not intended to be operated by means of an external timer or separate remote-control system. Maintenance and care
Switching the appliance off Cleaning the appliance
Disconnect your appliance from the electricity supply before carrying out any work on it. [. . . ]