Detailed instructions for use are in the User's Guide.
[. . . ] s
s
Siemens Aktiengesellschaft, issued by Communications, Haidenauplatz 1 D-81667 Munich Siemens AG 2005 All rights reserved. Siemens Aktiengesellschaft www. siemens. com/ax75
Designed for life
AX75
Table of Contents
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Switching on your phone for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
See also Index at the end of this User Guide
2
Safety precautions
Safety precautions
Information for parents Please read the operating instructions and safety precautions carefully before use. [. . . ] After a short pause, the current situation is transmitted by the network and displayed. Clear all All set diverts are cleared.
Clock Menu m Clock Select function.
Time/date
The clock must be set to the right time once at start-up. Change Enter the date first, then the time.
Time zones
Set the time zone for your area.
Time format
Select 24h or 12h.
Date format
DD. MM. YYYY or MM/DD/YYYY
Buddhist year
Switch to the Buddhist year (not on all phone models).
Show clock
Activate/deactivate time display in standby mode.
Automatic switch off
The phone switches off each day at the set time. Manual OK
Deactivate:
Minute beep
During a call, you will hear a beep after each minute as a reminder of the time elapsed. The recipient does not hear this beep.
Connectivity Menu m Connectivity Select function.
GPRS GPRS info
Display of information on connection status.
Yes / No Switch GPRS function on/off.
b
Setup IrDA
Your phone has an infrared interface. With this interface, you can exchange data such as pictures, ringtones and phonebook entries with other appliances which also have an infrared interface. The infrared windows in both devices must be aligned as accurately as possible with each other. If necessary, check with your service provider for details.
25
HTTP profile
Fax/data
Authentication Data services
D Activate or deactivate encrypted Internet dial-up (CSD connections only).
Menu m Connectivity
Rec fax/data b The call is signalled by a special ringtone and the type of call (fax or data) is displayed. Now start the communication program in your PC to receive the fax/data. Send voice/fax b To switch from voice mode to fax mode, set the function on the phone before transmission. Rec voice/fax b After starting the PC communication program, activate the function during a call. End transmission End transmission with PC software and/or press B.
Select function. For the MMS, WAP and HTTP applications at least one connection profile must be set up and activated. The default for the phone depends on each service provider: The settings have already been implemented by the provider. If necessary enter CSD settings and GPRS settings (your service provider will supply you with information on this if necessary or www. siemens. com/ mobilephonescustomercare in the FAQ section). Select profile D Change setting Options Edit (Enter data) Save.
Security Menu m Security Select function.
Auto key lock
The keypad is locked automatically if no key has been pressed for one minute in standby mode. However, you can still be called and you can still make an emergency call.
Direct call
(Phone-code protected) Only one phone number can be dialled.
26 Only ,
Setup
(PIN2 protected) Restrict calls to SIM-protected numbers in the Phonebook.
b
File system
Format The file system memory (p. 32) is formatted and all data that has been saved is deleted, including e. g. Clean up The file system is defragmented.
Last 10 only
(Phone-code protected) Restrict calls to the list of "dialled numbers" (p. 16).
Codes
PIN control, Change PIN, Change PIN2, Change phonecode (p. 9).
Master reset
The phone is reset to the default values (factory setting) (does not apply to SIM card or network settings). Alternative input in standby mode:
This SIM only
(Phone-code protected) Your phone is prevented from being used with a different SIM card.
b b
*
9999
A
Barrings
Network barring restricts the use of your SIM card. [. . . ] YOU ASSUME ALL
39
RESPONSIBILITY TO ACHIEVE YOUR INTENDED RESULTS AND FOR THE INSTALLATION, USE, AND RESULTS OBTAINED FROM IT. This Agreement creates no obligations on the part of Siemens other than as specifically set forth herein. IN NO EVENT SHALL SIEMENS, ITS EMPLOYEES, LICENSORS, AFFILIATES OR AGENTS BE LIABLE FOR ANY DIRECT DAMAGES, LOST PROFITS, DATA OR BUSINESS, OR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, PROPERTY DAMAGE, INTERRUPTION OF BUSINESS OR FOR ANY SPECIAL, INDIRECT, INCIDENTAL, EXEMPLARY, ECONOMIC, PUNITIVE OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED, AND WHETHER ARISING UNDER CONTRACT, TORT, NEGLIGENCE, OR OTHER THEORY OF LIABILITY, OR ARISING OUT OF THE USE OF OR INABILITY TO USE THE LICENSED SOFTWARE, EVEN IF SIEMENS IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE LIMITATION OF LIABILITY SHALL NOT APPLY IF AND TO THE EXTENT SIEMENS LIABILITY IS MANDATORY UNDER THE APPLICABLE LAW E. G. [. . . ]