User manual SIEMENS GIGASET S680
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SIEMENS GIGASET S680. We hope that this SIEMENS GIGASET S680 user guide will be useful to you.
You may also download the following manuals related to this product:
SIEMENS GIGASET S680 (1507 ko)
SIEMENS GIGASET S680 (218 ko)
SIEMENS GIGASET S680 (2120 ko)
SIEMENS GIGASET S680 (1139 ko)
SIEMENS GIGASET S680 (2365 ko)
SIEMENS GIGASET S680 (1450 ko)
SIEMENS GIGASET S680 (1519 ko)
SIEMENS GIGASET S680 (1295 ko)
SIEMENS GIGASET S680 (1237 ko)
SIEMENS GIGASET S680 (1151 ko)
SIEMENS GIGASET S680 (1583 ko)
SIEMENS GIGASET S680 (1370 ko)
SIEMENS GIGASET S680 (1725 ko)
SIEMENS GIGASET S680 (1442 ko)
SIEMENS GIGASET S680 (1654 ko)
SIEMENS GIGASET S680 (1417 ko)
SIEMENS GIGASET S680 (1491 ko)
SIEMENS GIGASET S680 (1927 ko)
SIEMENS GIGASET S680 (1187 ko)
SIEMENS GIGASET S680 (1323 ko)
SIEMENS GIGASET S680 (1310 ko)
SIEMENS GIGASET S680 (1618 ko)
SIEMENS GIGASET S680 (1160 ko)
SIEMENS GIGASET S680 (1395 ko)
SIEMENS GIGASET S680 (1345 ko)
SIEMENS GIGASET S680 (1430 ko)
SIEMENS GIGASET S680 INFORMATION (67 ko)
SIEMENS GIGASET S680 (1202 ko)
Manual abstract: user guide SIEMENS GIGASET S680
Detailed instructions for use are in the User's Guide.
[. . . ] s
Issued by Gigaset Communications GmbH Schlavenhorst 66, D-46395 Bocholt Gigaset Communications GmbH is a trademark licensee of Siemens AG Gigaset Communications GmbH 2008 All rights reserved. www. gigaset. com
Gigaset S680
Gigaset
Handset at a glance
Handset at a glance
18 17 16
V
1 2
INT 1
15. 11. 07 ?09:45 SMS
3 4 5
15 14 13 12 11
10 9 8
6 7
The base station at a glance
1 Display (screen) in idle status 2 Charge status of the batteries = e V U (flat to full) = flashes: batteries almost flat e V U flashes: batteries charging 3 Display keys (page 10) 4 Message key Access to calls and message lists; Flashes: new message or new call 5 End call key, On/Off key End call, cancel function, go back one menu level (press briefly), back to idle status (press and hold), activate/deactivate handset (press and hold in idle status) 6 Hash key Keypad lock on/off (press and hold in idle status), Toggle between upper/lower case and digits (press and hold) 7 Call-by-call list key Open call-by-call list 8 Microphone 9 Recall key - Confer (flash) - Insert a dialling pause (press and hold) 10 Star key Ringer tones on/off (press and hold); With an open connection: switch between dial pulsing/touch tone dialling (press briefly) Open special characters table 11 Key 1 Dial network mailbox (press and hold) 12 Connection socket for headset 13 Talk key Answer a call, open last number redial list (press briefly), start dialling (press and hold) When writing an SMS: send SMS 14 Handsfree key Switch between earpiece and handsfree mode; Lights up: handsfree activated; Flashes: incoming call 15 Control key (page 10) 16 Bluetooth activated (page 47) 17 Eco mode activated (page 12) 18 Signal strength i (high to low) | flashes: no reception
Registration/paging key (page 35) 1
Contents
Contents
Handset at a glance . 35 36 36 36 36 37 38 38 38
Making calls easily using network services . [. . . ] Press the display key.
Deleting an info service
Then:
Select the info service (see above).
Options
Open menu. Select and press OK.
Delete Entry
Activating/deactivating the SMS function
If you deactivate the SMS function, you cannot send or receive any SMS messages with your phone. The settings which you have made for sending and receiving SMS messages (e. g. the call numbers of the SMS centres) and the entries in the incoming and draft message lists are saved even after you turn off your phone. Q OK Or:
OK Activate SMS function (default setting).
32
SMS (text messages)
SMS troubleshooting
Error codes when sending
E0 Calling Line Identification permanently withheld (CLIR) or Calling Line Identification not activated. FD Connection to SMS centre failed, see selfhelp.
The message is played back. Ask your service provider to activate this function (chargeable).
2. Your mobile phone operator and your fixed network SMS service provider have not agreed on a co-operation. Your terminal is recorded by your SMS provider as having no fixed network SMS functionality, i. e. Have the device (re-)registered to receive SMS messages.
Self-help with errors
The following table lists error situations and possible causes and provides notes on troubleshooting.
You cannot send messages. You have not requested the CLIP service (Calling Line Identification Presentation). Ask your service provider to enable this service.
Messages are only received during the day. The terminal is recorded in your SMS provider's database as having no fixed network SMS functionality, i. e. No number or an invalid number is entered for the SMS centre set as the active send service centre. Enter the number (page 31).
You receive an incomplete SMS. Give your SMS contacts your new ID or undo the change (page 31).
2. Call diversion is activated with When: All Calls or the All Calls call diversion is activated for the network mailbox. Change the call diversion
33
Using the network mailbox
Using the network mailbox
The network mailbox is your network provider's answer machine within the network. You cannot use the network mailbox unless you have requested it from your network provider.
Calling the network mailbox
d Press and hold. You will hear the network mailbox announcement.
Configuring fast access for the network mailbox
With fast access, you can dial the network mailbox directly. You only need to enter the number of the network mailbox.
Viewing the network mailbox report
When a message is recorded, you receive a call from the network mailbox. If you have requested Calling Line Identification, the network mailbox number will be displayed. [. . . ] This is illustrated below using the example of "Setting the date and time". You will see the following display (example):
Date/Time
Date: [15. 11. 2007] Time: 11:11
Writing and editing text
The following rules apply when writing a text: u Control the cursor with u v t s. Select the required character, press the display key Insert to insert the character at the cursor position. u The first letter of the name of directory entries is automatically capitalised, followed by lower case letters.
Writing an SMS/name (without predictive text)
Save
Press the relevant key several times to enter letters/characters.
Date: Enter the day, month and year in 8-digit format. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SIEMENS GIGASET S680
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SIEMENS GIGASET S680 will begin.