User manual SIEMENS WD14H420EU
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SIEMENS WD14H420EU. We hope that this SIEMENS WD14H420EU user guide will be useful to you.
You may also download the following manuals related to this product:
SIEMENS WD14H420EU (2006 ko)
SIEMENS WD14H420EU (4416 ko)
SIEMENS WD14H420EU (4438 ko)
SIEMENS WD14H420EU annexe 2 (3719 ko)
SIEMENS WD14H420EU annexe 1 (3813 ko)
SIEMENS WD14H420EU annexe 1 (2817 ko)
SIEMENS WD14H420EU annexe 1 (2799 ko)
SIEMENS WD14H420EU annexe 1 (3914 ko)
SIEMENS WD14H420EU annexe 1 (3923 ko)
SIEMENS WD14H420EU annexe 1 (3639 ko)
Manual abstract: user guide SIEMENS WD14H420EU
Detailed instructions for use are in the User's Guide.
[. . . ] Safety instructions
The washer dryer is heavy take care when lifting it. Do not install the washer dryer outdoors or in areas where there is a risk of frost. In addition to the instructions mentioned here, special regulations of the relevant water and power supply companies may apply. Lay hoses and cables in such a way that there is no risk that they can be tripped over.
Installation area
Stability is important to prevent the machine from wandering. [. . . ] We will always find a suitable solution and will avoid a visit from a service technician wherever possible. The contact details for all countries can be found in the enclosed after-sales service directory. This will ensure that the repair is carried out by trained service technicians who arrive equipped with genuine spare parts for your appliance.
Read these instructions before switching on the washer dryer. Retain all documents for subsequent use or for the next owner.
6
7
8
9
Safety instructions
The washer dryer is heavy take care when lifting it. Do not install the washer dryer outdoors or in areas where there is a risk of frost. In addition to the instructions mentioned here, special regulations of the relevant water and power supply companies may apply. Lay hoses and cables in such a way that there is no risk that they can be tripped over.
Installation area
Stability is important to prevent the machine from wandering. Ensure the area is well ventilated to achieve good drying performance.
If installing the appliance on a pedestal
It is essential to secure the washer dryer feet with holding brackets *.
If installing the appliance on a wooden joist floor
If possible, install the washer dryer in a corner. It is essential to secure the washer dryer feet with holding brackets *. WMZ 2200, WX 9756
Environmental disposal
Dispose of packaging in an environmentally friendly manner. This appliance has been identified in accordance with the European Directive 2002/96/EEC on Waste Electrical and Electronic Equipment (WEEE). The Directive specifies a framework for the return and recycling of waste appliances and is valid throughout Europe.
Hose and cable lengths
Connection on left side
or
Connection on right side
Scope of delivery
Aqua-Stop Aqua-Secure
Humidity in the drum is caused by the final inspection.
~140 cm ~90 cm
Standard
max. 100 cm
Water drainage Power cord Water supply
~95 cm ~160 cm ~140 cm ~165 cm min. 60 cm
Note: if hose holders are used, the hose lengths may be reduced. Available from dealer/customer service: Aqua-Stop extension hose **, approx. WMZ 2380, WZ 10130 Covers Hose holder
Built-under/Built-in appliance
Depending on the connection
A 2440 mm dia. hose clip may also be required for connecting the siphon (available from specialist retailers). Page 4: Water connection Build-under/build-in before connection to the power supply.
Useful tool
Spirit level for aligning the washer dryer. Wrench for adjusting the machine feet.
Installed in between kitchen units (built-under or built-in)
Dimension requirement of kitchen unit: a = 650 mm, b = 620 mm, c = 850 mm Install washer dryer only under a continuous worktop that is connected firmly to the adjacent cupboards. The installation area must be well ventilated, otherwise the washer dryer will operate below optimum performance. Dimension of ventilation cross-section: d x e = 200 mm x 100 mm, f = 365 mm Distance between wall and machine: 50 mm
f
e
1
2
Removing transport bolts
Before using the appliance for the first time, always remove and retain all 4 transport bolts. If transporting the appliance subsequently, always re-install the transport bolts this prevents damage to the machine. [. . . ] The contact details for all countries can be found in the enclosed after-sales service directory. Please give the after-sales service the product number (E-Nr. ) and the production number (FD) of the appliance. You will find this information: on the inside of the washer dryer door*/opened service flap* and rear of the appliance. *depending on the model
Power supply
Water pressure Drain height Test programmes
Product number
Production number
Rely on the professionalism of the manufacturer. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SIEMENS WD14H420EU
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SIEMENS WD14H420EU will begin.