User manual SKIL 0900

[. . . ] [. . . ] 30 www. skileurope. com SKIL Europe BV - Konijnenberg 60 4825 BD Breda - The Netherlands 03/08 2610398627 1 2 b c d a a b c d e 795 mm 625 mm 370 mm 160 mm 640 mm 100 e 3 E C D B A 2 4 5 3 6 7a 7b 8 4 9a 8x 6x38 mm 6x12 mm 4x 8x45 mm 8x16 mm 2x 8x45 mm 4x 8x 8x 4x 4x 4x 2x 8x16 mm M6 M8 M8 5 9b 16x 4x15 mm 2x 2x 8x30 mm 8x19, 5 mm M8 4x 6x 2x 4x 6 0 1-6 x 1-6 x 7 ! 8 @ # 9 GB 5 pull adjustable clamping jaw B with the other hand towards the workpiece and fixed clamping jaw E Workbench INTRODUCTION 0900 6 carefully tighten each clamping handle with less than · The Slide and Lock system works in an entirely different way from all other conventional clamping systems · Read this instruction manual carefully before use and save it for future reference 1 · Only use the parts and accessories supplied; damage due to the use of non-original parts and accessories will be excluded from the warranty · This workbench is not intended to be used for clamping electrical power tools one turn (mostly less than half a turn) - for releasing the workpiece simply turn each clamping handle back into the downward position !never try to fine-adjust the clamping jaws by turning the clamping handles counter-clockwise, because this always results in releasing the clamping jaws - repeat steps 1 through 6 for every new clamping procedure · Clamping blocks !ensure that the workpiece is securely clamped · Folding out the workbench @ · Collapsing the workbench # TECHNICAL SPECIFICATIONS 2 WORKBENCH PARTS 3 A B C D E Clamping handle Adjustable clamping jaw Support arm (max. 5 kg) Clamping block Fixed clamping jaw SERVICE · If the workbench should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an after-sales service centre for SKIL power tools - send the workbench undismantled together with proof of purchase to your dealer or the nearest SKIL service station (addresses as well as the service diagram are listed on www. skileurope. com) SAFETY · Ensure that the workbench stands on a firm and nonslippery surface · Do not place heavy objects on the edge to prevent the workbench from turning over 5 · Do not attempt to climb onto or stand on the workbench 6 · Never load the worktop with more than 100 kg 7 · Place heavy objects calmly on the workbench; do not drop them 8 · Keep children away from work area · Store the workbench indoors in a dry and locked-up place, out of reach of children F Etabli INTRODUCTION 0900 USE · Assembly instructions 9 - the sequence of the numbers appearing in the drawing corresponds with the sequence of the steps to be followed for assembling the workbench ! [. . . ] [. . . ]