User manual SKIL 2100DAF
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SKIL 2100DAF. We hope that this SKIL 2100DAF user guide will be useful to you.
 |
Manual abstract: user guide SKIL 2100DAF
Detailed instructions for use are in the User's Guide.
[. . . ] WARNING careful in handling, may Dropping or banging the device may result in impaired function or future inaccurate readings. Optimal operation of the measuring tool is possible only when the operating instructions and information are read completely, and the instructions contained therein are strictly followed. [. . . ] The displayed reading corresponds with the internal angle w between the base leg and the fold-out leg. The reading is indicated on the display until the legs are moved in relation to each other. The reading remains unchanged (even when the legs are moved in relation to each other) until the HOLD button 6 is pressed again. 4) Position the measuring tool with the fold-out leg 1 or with base leg 3 against the angle you want to measure. Adjust the required angle with the other leg and project the angle onto the workpiece. When directly projecting a measured angle onto a workpiece, pay attention that the foldout leg 1 and base leg 3 don't move. After pressing the HOLD button 6, which stores the measured angle, the user can now activate the MTR (miter) button 5. By pressing the MTR button 5, the Angle Finder is taking the measured angle and converting it to the correct Miter Cut Angle. This measurement is what you need to set your miter saw in order to create the correct cut. For safe and proper working, always keep the measuring tool clean Do not immerse the measuring tool into water or other fluids. [. . . ] SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by law, shall be the repair or replacement of parts, without charge, which are defective in material or workmanship and which have not been misused, carelessly handled, or misrepaired by persons other than Seller or Authorized Service Station. To make a claim under this Limited Warranty, you must return the complete portable power tool product, transportation prepaid, to any SKIL Factory Service Center or Authorized Service Station. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SKIL 2100DAF
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SKIL 2100DAF will begin.