User manual SKIL 7492

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SKIL 7492. We hope that this SKIL 7492 user guide will be useful to you.


SKIL 7492 : Download the complete user guide (522 Ko)

You may also download the following manuals related to this product:

   SKIL 7492 PARTS LIST (47 ko)

Manual abstract: user guide SKIL 7492

Detailed instructions for use are in the User's Guide.

[. . . ] If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. unmodified plugs and matching outlets will reduce risk of electric shock. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. [. . . ] Your tool is equipped with a dust canister, empty it frequently, after completion of sanding and before storing the sander. Be extremely careful of dust disposal, materials in fine particle form may be explosive. Combustion from mixture of varnishes, lacquers, polyurethane, oil or water with dust particles can occur if there is a static discharge, spark introduced in the box, or excessive heat. Always wear eye protection and a dust mask for dusty applications and when sanding overhead. Sanding particles can be absorbed by your eyes and inhaled easily and may cause health complications. Do not use PSA pad on random orbit sanders whose speed exceeds 12, 000/min. Exceeding the maximum operating speed of pad may cause pad to rupture or fly apart during use, striking user or bystanders. Larger sandpaper will extend beyond the sanding pad causing snagging, tearing of the paper or kick-back. Extra paper extending beyond the sanding pad can also cause serious lacerations. Clamping the workpiece prevents it from being ejected from under the sander and leaves both hands to control the tool. Proper interpretation of these symbols will allow you to operate the tool better and safer. Rotational speed, at no load Per minute Off position Selector settings Infinitely variable selector with off Arrow Alternating current Direct current Alternating or direct current Class II construction Earthing terminal Warning symbol Li-ion RBRC seal Zero speed, zero torque. Higher number means greater speed Speed is increasing from 0 setting Action in the direction of arrow Type or a characteristic of current Type or a characteristic of current Type or a characteristic of current Designates Double Insulated Construction tools. Grounding terminal Alerts user to warning messages Designates Li-ion battery recycling program This symbol designates that this tool is listed by the Canadian Standards Association, to United States and Canadian Standards. This symbol designates that this tool is listed by Underwriters Laboratories, to United States and Canadian Standards. This symbol designates that this tool is listed by Underwriters Laboratories. This symbol designates that this tool is listed by the Canadian Standards Association. This symbol designates that this tool is listed by the Intertek Testing Services, to United States and Canadian Standards. Disconnect the plug from the power source before making any WARNING from the power source before attaching or removing abrasive sheets. INSTALLING ACCESSORIES Your random orbit sander uses hook-and-loop backed accessories, which firmly grip the pad when applied with moderate pressure. To change the accessory, merely peel off the old accessory, remove dust from the pad if necessary, and press the new accessory in Always disconnect the plug place. Be sure to align the sanding disc holes with the holes in the backing pad to allow the dust extraction system to function. [. . . ] Ventilation openings and switch levers must be kept clean and free of foreign matter. Do not at tempt to clean by inserting pointed objects through openings. Some of these are: gasoline, carbon tetrachlo ride, chlo rinated cleaning solvents, ammonia and house hold detergents that contain ammonia. WARNING necessary, a cord with Adequate size conductors that is capable of carrying the current necessary for your tool must be used. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SKIL 7492




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SKIL 7492 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.