User manual SPEKTRUM DX6I

[. . . ] Leaders in Spread Spectrum Technology 6-Channel 10-Model Memory Full Range DSM2TM 2. 4GHz Radio System for Airplanes and Helicopters TAblE Of CONTENTS Spektrum's DX6i 6-channel DSM2 Full Range Airplane and Helicopter System . . . . . . . . . . . . . . . . . . . . . . . . 6 DSM2 DuaLink Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ModelMatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Receiver Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] will appear for several seconds and the transmitter will beep indicating the model has been changed. TO RETURN TO ThE MAIN SCREEN Press and hold the roller for more than 3 seconds then release the roller and the system will return to the main screen. Alternatively highlighting MAIN with the roller and pressing the roller will return to the MAIN screen. Turning the transmitter off then back on will also return to the main screen. Rotate the ROLLER to the right until MODEL SELECT is highlighted on screen. Reduce photo to 13. 5% MODElMATCh The DX6i features patented ModelMatchTM technology that prevents operating a model using the wrong memory. This feature can prevent stripped servo gears, broken linkages and even a crash due to trying to operate/ fly a model using the wrong memory. hOW MODElMATCh WORKS Each individual model memory has its own embedded code that is transferred to the receiver during binding. The receiver actually learns the code for the specific model memory that has been selected during binding and, when bound, will only operate when that model memory is selected. If a different (non-matching) model memory is selected, the receiver simply won't connect. This feature prevents trying to operate/ fly a model using the wrong model memory. The receiver can be re-programmed to operate with any other model memory by simply re-binding with the transmitter programmed to the desired model memory. Note: If the receiver is turned on and the matching model memory is not selected, the system will not connect. Either select the matching model memory or rebind the receiver in the current model memory to resume operation. ADJUST LIST MODEL SELECT Main 1 60 SPEKTRUM DX6i · RADIO PROGRAMMING GUIDE SPEKTRUM DX6i · RADIO PROGRAMMING GUIDE 61 DUAl RATE AND EXPONENTIAl The Dual Rate and Exponential function allows two control rates to be programmed and selected with a switch. Dual rates and Expos are available on the aileron, elevator and rudder channels. Changing the dual rate value not only affects the maximum control authority but also affects the overall sensitivity of control. The sensitivity around center can be tailored using the Exponential function to precisely adjust control feel. Dual and Expo rates can be controlled by their respective dual rate switches (aileron, elevator and rudder) or by one common switch (Aileron D/R, Elevator D/R, Rudder D/R or the Gear switch). See COMBI SWITCH screen on page 46 for detail on combining the Dual rate switches. The factory default settings for both the 0 and 1 switch positions are 100%. Exponential values are adjustable from -100% to +100% with a factory default of 0% or inhibit. Either switch position may be selected as the low or high rate by placing the switch in the desired position and adjusting the value accordingly. Note: A negative (-) Expo value will increase sensitivity around neutral, and a positive (+) Expo value will decrease sensitivity around neutral. Normally a positive value is used to desensitize control response around neutral. [. . . ] The Product manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or injury. qUESTIONS, ASSISTANCE, AND REPAIRS Your local hobby store and/or place of purchase cannot provide warranty support or repair. Once assembly, setup or use of the Product has been started, you must contact Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. [. . . ]